win a ball from Bowling.com

Author Topic: Urethane Gargoyle  (Read 2986 times)

agroves

  • Hero Member
  • *****
  • Posts: 4939
Urethane Gargoyle
« on: October 11, 2004, 07:13:29 AM »
Is this one weak or strong on drier lanes??  

I have seen a few Visionary balls but never thrown one myself.  The Crimson Ex. looked devastating on the backend.

Thanks,
Andrew
--------------------
FUFU
Wanna review my balls

 

Strider

  • Hero Member
  • *****
  • Posts: 6751
Re: Urethane Gargoyle
« Reply #1 on: October 11, 2004, 03:34:56 PM »
I guess it really depends on your definition of dry.  What do you mean by being weak or strong on dry lanes?  Amount of hook?  React strong to the dry?  For me, the urethane works better playing down and in, and resin works better when you have more swing room.

It obviously doesn't bounce hard off the dry like resin.  For me, the SBG fits nicely between a Storm Blue Hot Flame (weak resin) and plastic.  The shiny pearl cover is allergic to oil, so it will skate a mile.  I can get a fairly hard arc on drier conditions if I come around the Gargoyle, but I don't carry very well.  A more up the back release keeps the ball rolling straighter towards the pocket and a much higher carry percentage.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive

agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: Urethane Gargoyle
« Reply #2 on: October 11, 2004, 03:41:45 PM »
Strider, I guess I am looking for something weaker than resin.  I had a Urethane Messenger that I couldn't play down and in on drier conditions.  It was actually quite strong, with a strong drilling.  I am looking for something the goes straight with an arcy backend that keeps me out of trouble in later 8-9-10 game blocks.  

Andrew
--------------------
FUFU
Wanna review my balls

intergalactic

  • Sr. Member
  • ****
  • Posts: 353
Re: Urethane Gargoyle
« Reply #3 on: October 11, 2004, 03:44:40 PM »
I'm thinking of getting this gargoyle because I have grown very fond of playing up the first arrow with my spare ball but I'm worried it will be to strong.
--------------------
Faster than a bullet
Terrifying scream
Enraged and full of anger
He's half man and half machine

Rides the metal monster
Breathing smoke and fire
Closing in with vengeance soaring high
www.JudasPriest.com

agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: Urethane Gargoyle
« Reply #4 on: October 11, 2004, 03:47:34 PM »
I wonder what it would be like with the pin above bridge, cg 1/2 positive side, weight hole to negative side weight......hmmmmm.

andrew
--------------------
FUFU
Wanna review my balls

JPRLane1

  • Hero Member
  • *****
  • Posts: 3318
Re: Urethane Gargoyle
« Reply #5 on: October 11, 2004, 03:48:39 PM »
XXXL
--------------------
I should just quit bowling, oh wait I already tried that.
Now that I am back and my Saws are sharp again, I am ready to cut some wood.
Leader & Founder of Fellowship of the Saws! 03/04/05 Respect us or get left in our Saw Dust!
Level 2 Certified Coach!

intergalactic

  • Sr. Member
  • ****
  • Posts: 353
Re: Urethane Gargoyle
« Reply #6 on: October 11, 2004, 03:50:29 PM »
What about an old back hammer urethane would it hook more than the gargoyle? Hmmmmmm
--------------------
Faster than a bullet
Terrifying scream
Enraged and full of anger
He's half man and half machine

Rides the metal monster
Breathing smoke and fire
Closing in with vengeance soaring high
www.JudasPriest.com

agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: Urethane Gargoyle
« Reply #7 on: October 11, 2004, 03:54:32 PM »
quote:
What about an old back hammer urethane would it hook more than the gargoyle? Hmmmmmm
--------------------
Faster than a bullet
Terrifying scream
Enraged and full of anger
He's half man and half machine

Rides the metal monster
Breathing smoke and fire
Closing in with vengeance soaring high
www.JudasPriest.com



I should just get a gold angle....j/k

andrew
--------------------
FUFU
Wanna review my balls

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Urethane Gargoyle
« Reply #8 on: October 11, 2004, 04:00:50 PM »
Guys,

My belief:

The problem is that pearl urethane will still grab the lane earlier than polished, mild resins, when the heads start to dry up or there's really short oil. This is true Unless you have higher balls speeds or 90 degrees rotational axis or some combination thereof.

When you move deeper, inside the 4th arrow, SOLELY because there's not enough oil, a mild pearlized resin, with enough backend (important factor) seems to work best. If you can stay at the 3rd arrow or outside it, at the arrows, and still get proper length on a ball like the Slate Blue, it will give you what you need. The majpr factor in this scenario is having enough energy left in the ball, after it starts hooking, for it to carry decently.

Pearlized urethane's forte is control and weaker backend after it starts to go thru the skid/hook/roll cycle.

I tried my SBG 3 weeks ago and couldn't get it long enough to retain energy. Once I had to go inside the 4th arrow, I couldn't get enough length on it, or have enough left to make that huge turn to the pocket. Had to go to polished resin, with a laydown point at the 39 board. OUCH! Thankfully they have put down serious oil since that time.

--------------------
"We get old too fast, and too late, smart."
"None are so blind as those who will not see."

intergalactic

  • Sr. Member
  • ****
  • Posts: 353
Re: Urethane Gargoyle
« Reply #9 on: October 11, 2004, 04:21:18 PM »
The way I see it and I may be WAY off but that urethane is like particle in that both are always trying to grab the lane on the other hand reactive wants to skid then hook.
--------------------
Faster than a bullet
Terrifying scream
Enraged and full of anger
He's half man and half machine

Rides the metal monster
Breathing smoke and fire
Closing in with vengeance soaring high
www.JudasPriest.com

agroves

  • Hero Member
  • *****
  • Posts: 4939
Re: Urethane Gargoyle
« Reply #10 on: October 11, 2004, 06:57:19 PM »
yes, we are.....

andrew
--------------------
FUFU
Wanna review my balls

louie

  • Hero Member
  • *****
  • Posts: 1008
Re: Urethane Gargoyle
« Reply #11 on: October 11, 2004, 08:42:32 PM »
I have a SBG and it is a nice ball, but it isn't as mild as you might think. On really hooking conditions the SBG goes long and then really hooks a ton on the backend. Carry is very good, but sometimes I just can't get deep enough on the lane. I like it best when the heads are dry and some oil has carried down. I can play a bit straighter with the ball and pound the pocket all day. I actually find my Barbed Wire to be straighter than the SBG on most hooking conditions. The Barbed wire won't hit with carrydown where the SBG will. It all depends on what kind of dry we're talking about and how you roll the ball.
--------------------

Why does everyone laugh when I bowl?


louie

Why does everyone laugh when I bowl?


louie


I_Bowl4Money

  • Hero Member
  • *****
  • Posts: 677
Re: Urethane Gargoyle
« Reply #12 on: October 12, 2004, 08:38:03 AM »

I've read all the posts and I'm really interested to know how you all have your Slates drilled.  You talk about it having an agressive or violent backend...please let me know so I may comment further....I may be able to add a few tid-bits that may help in achieving the results you're looking for with this ball.




--------------------
VBP 100% - - If you have the money then I've got the time!!
http://www.bowl4money.com
http://www.visionarybowling.com
Stephen Hahn
PBA Professional
Brunswick Regional Staffer
VISE Regional Staffer

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Urethane Gargoyle
« Reply #13 on: October 12, 2004, 12:32:07 PM »
quote:

I've read all the posts and I'm really interested to know how you all have your Slates drilled.  You talk about it having an agressive or violent backend...please let me know so I may comment further....I may be able to add a few tid-bits that may help in achieving the results you're looking for with this ball.

--------------------
VBP 100% - - If you have the money then I've got the time!!
http://www.bowl4money.com
http://www.visionarybowling.com



I, for one, certainy never mentioned a violent backend. My observation so far is that, on dryish light oil lanes, it hooks earlier than a few of my resin balls. It has less backend than they do, but that is the good part of its control nature. That is also the reason I hesitate to use it from deeper inside angles. I'm thinking maybe I shuld try it on light to medium-light oil instead of waiting for drying conditions.

Mine has the pin about 1" above, 1/2" to the right of the ring finger with CG just above the center of the grip. This is roughly a 4 x 5 drilling for me with about 1 oz finger & top weight.
--------------------
"We get old too fast, and too late, smart."
"None are so blind as those who will not see."

louie

  • Hero Member
  • *****
  • Posts: 1008
Re: Urethane Gargoyle
« Reply #14 on: October 12, 2004, 03:39:35 PM »
Mine has the pin just above and right of ring finger. Cg in span. It's long and strong for me on DRY. I'm a no thumber so everything hooks a lot for me. I like the ball, but find that the Barbed Wire covers less boards on dry lanes.
--------------------

Why does everyone laugh when I bowl?


louie

Why does everyone laugh when I bowl?


louie