win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Ogre Pearl  (Read 885 times)

machine189

  • Full Member
  • ***
  • Posts: 176
Ogre Pearl
« on: January 12, 2008, 02:12:25 PM »
I've heard that this is a great bench make ball, but i have yet to see anything impressive about it. For one on a fresh house shot it just goes too long and when the condition it becomes very unpredictable, it will over react on the backend and on the next shot not even move. has anyone else had this problem???
--------------------
Don't get mad..Get better!
Logged

 

TWOHAND834

  • Hero Member
  • *****
  • Posts: 4333
Re: Ogre Pearl
« Reply #1 on: January 12, 2008, 11:35:48 PM »
How is it drilled and what condition are you bowling on?  Sounds like you have alot of wet/dry and/or over/under which you can get from just about any ball.
--------------------
Steven Vance
Former Pro Shop Operator

If anyone out there is worried about the scores being too high, try duckpin!!
Logged
Steven Vance
Former Pro Shop Operator
Former Classic Products Assistant Manager

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Ogre Pearl
« Reply #2 on: January 13, 2008, 06:17:27 AM »
quote:
I've heard that this is a great bench make ball, but i have yet to see anything impressive about it. For one on a fresh house shot it just goes too long and when the condition it becomes very unpredictable, it will over react on the backend and on the next shot not even move. has anyone else had this problem???
--------------------
Don't get mad..Get better!


Nope.

Whether a ball is a good benchmark for depends on three things: how you throw it, how you drill it and on how much oil you are bowling. Give us some details on those three items, considering there is absolutely nothing in your profile. Then we can make some major suggestions.

Meanwhile, as Drrev2000 says, an initial step that can be considered is smoothing down the amount of gloss on the cover with a Scotch-Brite nylon pad a little at a time and test each change to see how the reaction has changed. Another potential change is to start the ball up further outside, closer but not in the actual dry, to smooth out the ball's reaction. A thrid is change your release slightly to use less axis tilt and a more end-over-end release.

A benchmark ball for others may not be a good benchmark ball for you, given the 3 factors listed above.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ
Logged
"None are so blind as those who will not see."

Krumpy300

  • Hero Member
  • *****
  • Posts: 827
Re: Ogre Pearl
« Reply #3 on: January 14, 2008, 09:29:23 AM »
I agree with Charlest. I actually have 2 benchmark balls this year because the 2 houses I bowl in are different. I always start with them first and adjust according to how they react. Sometimes my "benchmark" ball doesn't make it through 3 frames of shadow.


--------------------
Repetition is everything..
Logged

scotts33

  • Hero Member
  • *****
  • Posts: 8451
Re: Ogre Pearl
« Reply #4 on: January 14, 2008, 10:00:39 AM »
These are the balls I've liked for "bench mark" read lanes 1st out of bag.

Ogre Pearl pin to PAP 4.25" over ring OOB.
Hei$t pin to PAP 4.25" over ring CG kicked in 105 deg. OOB.
Thing pin to PAP 4" pin next to ring 60 deg. OOB
DynoThane Solid Black Vendetta pin to PAP 4" next to ring 60 deg. X hole below PAP 1" 2000 abralon

ALL have one thing in common.  ARC!  No skid-flippy ball for this boy for "benchmark"  
--------------------
Scott

Logged
Scott

lenstanles703

  • Sr. Member
  • ****
  • Posts: 346
Re: Ogre Pearl
« Reply #5 on: January 16, 2008, 03:18:08 PM »
I agree about surface changes. When I got Ogre pearl it started hooking too early for me so I polished it. Now its my benchmark ball. Used magic dust.
--------------------
"We are all one"
Visionary test staff member
Logged

machine189

  • Full Member
  • ***
  • Posts: 176
Re: Ogre Pearl
« Reply #6 on: January 18, 2008, 05:53:16 PM »
quote:
Nope.

Whether a ball is a good benchmark for depends on three things: how you throw it, how you drill it and on how much oil you are bowling. Give us some details on those three items, considering there is absolutely nothing in your profile. Then we can make some major suggestions.

Meanwhile, as Drrev2000 says, an initial step that can be considered is smoothing down the amount of gloss on the cover with a Scotch-Brite nylon pad a little at a time and test each change to see how the reaction has changed. Another potential change is to start the ball up further outside, closer but not in the actual dry, to smooth out the ball's reaction. A thrid is change your release slightly to use less axis tilt and a more end-over-end release.

A benchmark ball for others may not be a good benchmark ball for you, given the 3 factors listed above.
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ


Thanks charlest! well before i did any surface adjustments i figured i'd try a different release..you were right with more end over end roll this ball hit like a ton of bricks! But any side roll and it going lond for days..Oh well this is just a ball i'll have to be more consistent with
--------------------
Don't get mad..Get better!

Edited on 1/18/2008 6:54 PM
Logged
Pages: [1]
« previous next »