win a ball from Bowling.com

Author Topic: Cracked ball #3!  (Read 6488 times)

Artimust

  • Hero Member
  • *****
  • Posts: 795
Cracked ball #3!
« on: February 21, 2012, 08:24:02 AM »
Darn it!  I was getting ready to go to league last night and wanted to change up one of my regular balls that I been bringing (4 ball arsenal) and took out my Hammer Epidemic and grabbed my original Break.  Well, my Break was broke!  Split in half from the pin to the thumbhole all the way around.  This is my third ball to crack like this (all the way around) and all of them were 900 Global balls.  First was the Break Pearl, then the Bank, and now the Break.  All my balls are kept in my enclosed garage that does not fluxuate too much in temperature (no snow or heatwaves here).  Getting costly here! 


I know it sounds like I'm in denial, but I'm not.

 

chrischop04

  • Jr. Member
  • **
  • Posts: 42
Re: Cracked ball #3!
« Reply #1 on: February 21, 2012, 04:59:01 PM »
i have had this happen with them in my bed room take them back to where u got them i have had them replaced before. it dont hurt to try



mainzer

  • Hero Member
  • *****
  • Posts: 4405
Re: Cracked ball #3!
« Reply #2 on: February 21, 2012, 04:59:40 PM »
 Temp don't change betweem night and day??


MainzerPower
"No one runs...from the conquerer "

MainzerPower

42swaff

  • Hero Member
  • *****
  • Posts: 570
Re: Cracked ball #3!
« Reply #3 on: February 21, 2012, 05:38:48 PM »
ive noticed  this happens with all the brands not just global  and ive noticed if the ball is setting on the floor  it tends to drawl the moisture out of the ball and they all seem to crack  but if i keep them on the rack so air can get around them they tend to be fine.

any way this was my 2 cents here 

hope it helps

jeff



sevenpin63

  • Hero Member
  • *****
  • Posts: 4241
Re: Cracked ball #3!
« Reply #4 on: February 21, 2012, 06:20:22 PM »
I have never had a ball crack, like you said all my balls sit on a rack or are in my bag.

DON'T TEMPT THE BOWLING GODS

jkiser01

  • Hero Member
  • *****
  • Posts: 7124
Re: Cracked ball #3!
« Reply #5 on: February 21, 2012, 07:30:56 PM »
I would suggest 2 things:
 
1. DON,T keep any balls in a garage regardless of the temp changes.
 
2. Always put balls you are not using inside a tote or bowling bag. NEVER leave them laying directly on the floor.
 
I have followed those 2 rules and only had 1 ball crack out of many that I have had and stored safely.


My first child.. Hannah Allison Kiser 4 years old and my little angel!!

DV8-Damn good bowling balls!!

I also like AMF/900 Global..
Radical Bowling Technologies ...Its more than just an Attitude!

Artimust

  • Hero Member
  • *****
  • Posts: 795
Re: Cracked ball #3!
« Reply #6 on: February 21, 2012, 08:01:38 PM »
 The temps do change here but not drastically. Probably about 70 at night to 80's during the day.  I store my balls in 2 ball tote bags or in the ball box on a shelf, not on the floor.  The ones I use regularly are in either my 3 or 4 ball rollers.  I've had minor cracking around the grips before, but cracks that go all the way around the ball were only 900 Global balls.  Not dissing the quality of 900 because I love them.

I know it sounds like I'm in denial, but I'm not.

qstick777

  • Hero Member
  • *****
  • Posts: 5188
Re: Cracked ball #3!
« Reply #7 on: February 22, 2012, 08:52:36 AM »

Maybe you're just unlucky?  I keep my balls in my non-insulated, non-temp controlled garage.  During the season I keep the balls in my trunk.  Over the course of a year the thermometer out in the garage shows a min temp of 25 and high temp of 90+ and I haven't had any issues with balls cracking.  I have balls sitting in plastic bags in the box, and balls just sitting out in ball cups.  I do spend quite a bit of time out there rearranging, so they tend to get moved several times a year, and I do check them each time I move them - I think I'm just waiting for them to crack!
 
Some suggest it could be the drilling - dull bits, drilling too fast, not enough bevel, drilling too close to the pin, too much glue on inserts, etc?
 
 I drill my own stuff and have drilled closer than 1" to pin, drilled half the pin out, followed the "minimum of 1 inch to the holes," and still haven't had any problems.
 
I've got original Break, Break Pearl, Hei$t, Big Hei$t, Lunatic, Hype Urethane, Break Out, Break S75 - all drilled and sitting out there.  I also have numerous others from 900G/AMF that are undrilled and still no issues.
 
Artimust wrote on 2/21/2012 9:01 PM: The temps do change here but not drastically. Probably about 70 at night to 80's during the day.  I store my balls in 2 ball tote bags or in the ball box on a shelf, not on the floor.  The ones I use regularly are in either my 3 or 4 ball rollers.  I've had minor cracking around the grips before, but cracks that go all the way around the ball were only 900 Global balls.  Not dissing the quality of 900 because I love them.

I know it sounds like I'm in denial, but I'm not.

tekneek

  • Hero Member
  • *****
  • Posts: 5657
Re: Cracked ball #3!
« Reply #8 on: February 22, 2012, 09:11:25 AM »
it may be from a little know factor of the location of the ball in relation to the equator, maybe the gravatational forces are stronger and tend and pull on the core harder in Hawaii than in Va. All joking aside I feel your pain Art, sorry you are having those issues again.

 

I had an old C300 Icon drilled and left it in an outside storage building for over 3 years, sitting on a ball cup, temp here in the summer will exceed 105* for weeks at a time, winters rarely below freezing for more than a week, the Icon never cracked, resurfaced it sold it locally, and it is still being used today, with no cracking or other issues other than having inserts replaced once since it was resold. Go figure !


Steve
Leading Edge Pro Shop
brinkley2223@yahoo.com
512-755-2947



Steve
Leading Edge Pro Shop
Radical Bowling Technologies Advisory Staff
brinkley2223@yahoo.com
512-755-2947

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7605
Re: Cracked ball #3!
« Reply #9 on: February 22, 2012, 09:34:55 AM »

 



jkiser01 wrote on 21.02.2012 8:30 PM:
2. Always put balls you are not using inside a tote or bowling bag. NEVER leave them laying directly on the floor.

Or, to put it differently, make sure that the ball's weight does not rest in just one, small surface spot. This causes tension between filler and coverstock shell, esp. over longer periods. Temp changes will promote such tension - I'd guess that a cold gust of wind (e. g. opening a door - cold air keeps to the floor!) could be enough to make a shell crack.
 

IMHO, use a ball cup or something that distributes the weight of the ball on a larger "footprint", and maybe rotate the orb(s) once a weak, so that different spots get under weight pressure. I cannot promise that this prevents cracking, but I also lost balls in a rack in a mild flat climate, and probably due to having them rest too long in one position...


DizzyFugu - Reporting from Germany
2010/11 Benrather BC Club Champion
Confused by bowling? Check out BR.com's vault of wisdom: the unofficial FAQ section
DizzyFugu ~ Reporting from Germany

NY Mike

  • Hero Member
  • *****
  • Posts: 531
Re: Cracked ball #3!
« Reply #10 on: February 22, 2012, 10:00:31 AM »
I agree with Diz.   I had a Roto Solid Horizon and a Hammer Cherry Vibe I lost with similar cracks so it is not brand specific.   I haven't had issues with balls cracking due to temp changes but due to an article I read here I make certain to rotate and move balls around that are sitting idle in my trunk.  I haven't experienced any problems since.



Artimust

  • Hero Member
  • *****
  • Posts: 795
Re: Cracked ball #3!
« Reply #11 on: February 22, 2012, 10:27:13 AM »
 Thanks guys, appreciate all the tips!  Lol Steve, could it be too much sunny weather here?  Ahhh, the price of paradise!  Btw, the AMF Clutch I got from you is still doing great!  
The positive thing with the cracking balls is that when I show them to the wife, she actually tells me to buy a replacement, no questions asked!!!  :)

I know it sounds like I'm in denial, but I'm not.

tekneek

  • Hero Member
  • *****
  • Posts: 5657
Re: Cracked ball #3!
« Reply #12 on: February 22, 2012, 12:08:03 PM »
sounds like you have here trained well Art, I don't want to hear of chisel marks on these cracked rocks of yours !!!


Steve
Leading Edge Pro Shop
brinkley2223@yahoo.com
512-755-2947



Steve
Leading Edge Pro Shop
Radical Bowling Technologies Advisory Staff
brinkley2223@yahoo.com
512-755-2947

Str8drvr

  • Jr. Member
  • **
  • Posts: 16
Re: Cracked ball #3!
« Reply #13 on: March 08, 2012, 11:45:54 AM »
Just discussed this subject with my driller. He told me that believe it or not, the total "around the ball" cracking is caused by "GRAVITY". A ball manufacturer did a test on this.

 

They set two identical balls next to one another for an extended period of time. They rotated one ball every week and let the other one sit without moving it. The ball that was rotated did not crack, however the one that sat did crack all the way around. Their engineers attributed the cracking to gravity pulling down on one area of the ball for a long time. Makes sense as we all use a specific ball or balls repeatedly so they never sit for any time period.

 

BTW, I had a Columbia crack like that after sitting on the floor of my apartment for 2 months without moving.



Artimust

  • Hero Member
  • *****
  • Posts: 795
Re: Cracked ball #3!
« Reply #14 on: March 08, 2012, 02:15:22 PM »
That makes the most sense.  The balls that cracked were the ones that were sitting unused either in a box or bags on the shelf.  None of the ones that were actively seeing lane time ever cracked, so it seems that the thing to do is to move the balls around every so often or take them out and let see some playing time. 


I know it sounds like I'm in denial, but I'm not.