win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Link drill help  (Read 1290 times)

tdub36tjt

  • Hero Member
  • *****
  • Posts: 1542
Link drill help
« on: April 19, 2009, 01:33:54 PM »
Gonna drill my Link I won in the bracket challenge tomorrow. Was gonna drill it pin above ring or bridge. Around 4 1/2-5" to PAP. However it is a short pin. So not sure what to do...maybe pin under and a little left of the middle finger, or pin in the middle finger??

My PAP is 4 3/8 over 3/8 down. I want good length for light oil and not too snappy.

I have a Jazz that is basically pointless cause it goes straight left and not really that lengthy. And if there is oil in the middle forget it. However that ball is pin under bridge about 4 1/4" to axis.

I want some length but I don't want that uncontrollable backend that the Jazz has. I was thinking about using it to go straighter on the fresh and stay near the friction when they break down.
Logged

 

RealBowler

  • Hero Member
  • *****
  • Posts: 722
Re: Link drill help
« Reply #1 on: April 19, 2009, 09:47:52 PM »
Send it back and get a longer pin!  Whats the top weight on the ball and how short is the pin?  Do you use inserts?  If you want length, I wouldn't go with pin under.  Depending on the answers to the above you may be able to drill pin high.

Everything I've read is that the Link is stronger than expected.  If you are having issues controlling a Jazz I wouldn't drill a Link the same way.
--------------------
Haywood

********************************************
"Let every nation know, whether it wishes us well or ill,
that we shall pay any price, bear any burden,
meet any hardship, support any friend, oppose any foe,
in order to assure the survival and the success of liberty."

--JOHN F. KENNEDY
********************************************
Logged

tdub36tjt

  • Hero Member
  • *****
  • Posts: 1542
Re: Link drill help
« Reply #2 on: April 19, 2009, 09:51:02 PM »
Its 1 1/2 inch pin and 2 oz. top weight I was thinking maybe pin under and left a touch of the middle and negative MB just to get it to lay off??
Logged

shelley

  • Hero Member
  • *****
  • Posts: 9655
Re: Link drill help
« Reply #3 on: April 19, 2009, 10:17:50 PM »
Only 2oz of top weight?  I would drill it for length like you would any other ball.  If you want to put the pin above the fingers, I don't see why you can't do that.  If you need to remove extra finger weight, drill the fingers a little deeper.  2oz is very manageable.

SH
Logged

tdub36tjt

  • Hero Member
  • *****
  • Posts: 1542
Re: Link drill help
« Reply #4 on: April 19, 2009, 10:20:28 PM »
Is negative MB a good idea to get it to lay off a little??
Logged
Pages: [1]
« previous next »