Author Topic: 300 G/Rooz Cleats/Pucks? (Read 3307 times)

scotts33 · « **on:** November 20, 2007, 09:32:11 PM »

How many actually use the cleats or pucks that come with the 300 G Tour Ultra's? Or do you just use the different soles? Just wondering.
--------------------
Scott

tekneek · « **Reply #1 on:** November 21, 2007, 08:07:10 AM »

Scott I've never used the discs with the Roozs or 9G shoes. I use the gray felt sole with the orange leather heel about 90% of the time. I have used the discs several years ago with Linds XXXtras but could not get a consistant slide so I ditched them and began wearing Roozs, and since never had issues.

I do have 2 local customers who do use them, with good results.
--------------------
Steve
Leading Edge Pro Shop
512-755-2947

www.leadingedgeproshop.net

http://stores.ebay.com/Leading-Edge-Pro-Shop

Paypal address : tekneek@wildblue.net

DON DRAPER · « **Reply #2 on:** November 21, 2007, 01:26:48 PM »

i don't use them either. my usual setup is the deerskin sole and the flat hard rubber heel.

mab · « **Reply #3 on:** November 22, 2007, 06:36:47 AM »

Same as Steve never used the cleat sole or cleats, I've used the grey felt sole and the red/orange heel 90% of the time. Use the same set up with the my Dexters grey felt sole and red heel 100% of the time. I even cut out extra cleats when I purchased the sole sheets so I must have dozens of the cleats laying around in a ziplock bag.
--------------------
"Aye Thar Be Monsters Out There"
Ogres,Gryphons,Gargoyles,Centaurs

shelley · « **Reply #4 on:** November 22, 2007, 06:49:15 AM »

I use whatever came on the shoes when I bought them. I think it's the deerskin sole with the flat heel. I have never seen approaches sticky enough to need the cleat sole. I had slide problems for a few weeks that I used the chrome sole with the felt heel. And I've used the grooved heel for some very slick approaches.

SH

tekneek · « **Reply #5 on:** November 22, 2007, 07:11:14 AM »

our house is old, old wood with wood approaches that never get buffed or cleaned. So felt sole and leather heel is a must in order to slide.
--------------------
Steve
Leading Edge Pro Shop
512-755-2947

www.leadingedgeproshop.net

http://stores.ebay.com/Leading-Edge-Pro-Shop

Paypal address : tekneek@wildblue.net

RocketNJ · « **Reply #6 on:** November 22, 2007, 08:27:48 AM »

Once I het a house with tacky synthetic approaches. I used three teflon cleats without the "template". Otherwise I couldn't slide at all.

Normal houses I bowl at have wood approaches so sliding usually not an issue.

J_Mac · « **Reply #7 on:** November 22, 2007, 08:34:07 AM »

Semi-Hijack...

If anyone that has this sole and cleats and would not mind getting rid of them, please contact me. During the summer I need something between Dexter's #8 and #10 slide sole, and it just doesn't exist.

Thanks!
--------------------
"A word to the wise ain't necessary -- it's the stupid ones that need the advice." Bill Cosby
"Never argue with an idiot. They bring you down to their level and beat you with experience."

scotts33 · « **Reply #8 on:** November 23, 2007, 09:06:39 AM »

Thanks to all who responded. FWIW, I have never had such a hard season on synthetic approaches this fall.

quote:
Once I het a house with tacky synthetic approaches. I used three teflon cleats without the "template". Otherwise I couldn't slide at all.

RocketNJ,

What did you mean by using the teflon cleats with out "template"? I assume the sole with the holes cut in it?
--------------------
Scott

RocketNJ · « **Reply #9 on:** November 23, 2007, 04:45:12 PM »

Correct. I used the sole with holes to line up three teflon discs then removed the sole.

It was like trying to slide on tar! Damn synthetic approaches should be banned.

CPA · « **Reply #10 on:** November 24, 2007, 07:39:35 AM »

I use the different pucks that come with the shoes. I can fine tune my slide this way. I normally use different pucks. I can get the exact amount of slide that I want by doing this.

Also if required, I can change one or two pucks to get the right combination.

I did the same thing with the Linds Exxxtras.

Author Topic: 300 G/Rooz Cleats/Pucks? (Read 3307 times)

scotts33

300 G/Rooz Cleats/Pucks?

tekneek

Re: 300 G/Rooz Cleats/Pucks?

DON DRAPER

Re: 300 G/Rooz Cleats/Pucks?

mab

Re: 300 G/Rooz Cleats/Pucks?

shelley

Re: 300 G/Rooz Cleats/Pucks?

tekneek

Re: 300 G/Rooz Cleats/Pucks?

RocketNJ

Re: 300 G/Rooz Cleats/Pucks?

J_Mac

Re: 300 G/Rooz Cleats/Pucks?

scotts33

Re: 300 G/Rooz Cleats/Pucks?

RocketNJ

Re: 300 G/Rooz Cleats/Pucks?

CPA

Re: 300 G/Rooz Cleats/Pucks?