win a ball from Bowling.com

Author Topic: Slingshot, PK17 and Brunswick lately...  (Read 8980 times)

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Slingshot, PK17 and Brunswick lately...
« on: January 31, 2014, 11:36:58 PM »
Its kinda late for this topic, but after struggling for years on very dry wood lanes, Ive finally found the ultimate match for my old local center with the slingshot. Been averaging 225 with this ball, made myself quite a bit of money because of this.

When the slingshot was dropped from production, I was seriously disappointed. The strike king is just too strong for a player like me. With plastic balls, it just doesnt hit hard enough.

Seriously wish Brunswick would consider bringing back this ball or something 99% similar with a different ball name. As a loyal customer for many years, I do wish they consider a target market for high rev bowlers in asian countries where wood lanes and almost non-existent oil are common.  If this gap is not filled, I might have to move on to other brands which has something similar to the slingshot.

 

kidlost2000

  • Hero Member
  • *****
  • Posts: 5789
Re: Slingshot, PK17 and Brunswick lately...
« Reply #1 on: January 31, 2014, 11:59:17 PM »
Buy more Slingshots. I love them and did just that. I also have 4 undrilled power grooves.

The strike king is only a small step up from the slingshot.
…… you can't  add a physics term to a bowling term and expect it to mean something.

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Re: Slingshot, PK17 and Brunswick lately...
« Reply #2 on: February 04, 2014, 12:55:18 AM »
Did just that. Got myself a couple more slingshots. A very small expense compared to the earnings I got from my current slingshot.

I wonder if there are any older balls similar to the slingshot?

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Slingshot, PK17 and Brunswick lately...
« Reply #3 on: February 04, 2014, 05:21:14 AM »
Did just that. Got myself a couple more slingshots. A very small expense compared to the earnings I got from my current slingshot.

I wonder if there are any older balls similar to the slingshot?

If you use 16 lb. balls (I no longer use 16 lb. balls), Revolution is an older sister brand  to Brunswick. Danny Wiseman used to use them a lot on Tour, although they were initially made for the overseas market. I have a ball made by them called the Vengeance. I also uses the PK 17 coverstock and has a similar core to the Slingshot in that it's a high RG and low differential. The RG differential is slightly higher than the Slingshot, .033", but I found this ball very good for dry/light oil lanes.
http://www.123bowl.com/ball.cfm?ballid=1024
It is a green pearl, NIB, original box. If interested, please message me.
"None are so blind as those who will not see."

LuckyLefty

  • Hero Member
  • *****
  • Posts: 17348
Re: Slingshot, PK17 and Brunswick lately...
« Reply #4 on: February 04, 2014, 12:50:10 PM »
You are right about the slingshot.  Last year our Brunswick early anvil lanes were explosive on the left and jumpy on the right.

The Slingshots with their slower response coverstocks were every bit of plenty on the lanes and the pearly ones too much sometimes on the left!  Our big handed righties could do a nice job with them.

This year the lanes in general have some au jus down lane and the sling shot just can't cut it for striking power.

When the lanes get dry my Weakly drilled Strike King with its stronger core and good strong response to the dry can really kick out the corners.

Where I wouldn't uld a Slingshot this year on our lanes the Strike King can move quick enough! 

Both great balls on the lighter for different backend conditions!

Regards,

Luckylefty
It takes Courage to have Faith, and Faith to have Courage.

James M. McCurley, New Orleans, Louisiana

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Re: Slingshot, PK17 and Brunswick lately...
« Reply #5 on: February 04, 2014, 10:26:55 PM »
Very intersted in your vengeance, but I have switched to 15lbs last year due to consistency issues. Will keep an eye out for this, looks rg and cover looks extremely my cup of tea.
Ive seen a couple of people throwing strike kings here, cant really say I like it though...Really regretting not buying loads of merlot/gold slingshots last year...

dougb

  • Hero Member
  • *****
  • Posts: 1551
Re: Slingshot, PK17 and Brunswick lately...
« Reply #6 on: February 04, 2014, 11:38:07 PM »
Did just that. Got myself a couple more slingshots. A very small expense compared to the earnings I got from my current slingshot.

I wonder if there are any older balls similar to the slingshot?

If you use 16 lb. balls (I no longer use 16 lb. balls), Revolution is an older sister brand  to Brunswick. Danny Wiseman used to use them a lot on Tour, although they were initially made for the overseas market. I have a ball made by them called the Vengeance. I also uses the PK 17 coverstock and has a similar core to the Slingshot in that it's a high RG and low differential. The RG differential is slightly higher than the Slingshot, .033", but I found this ball very good for dry/light oil lanes.
http://www.123bowl.com/ball.cfm?ballid=1024
It is a green pearl, NIB, original box. If interested, please message me.

That ball is reminding me of the Rhino Pro Steel!

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Slingshot, PK17 and Brunswick lately...
« Reply #7 on: February 05, 2014, 06:20:06 AM »
Very intersted in your vengeance, but I have switched to 15lbs last year due to consistency issues. Will keep an eye out for this, looks rg and cover looks extremely my cup of tea.

I had been looking for them for years; gave my last 15 lb. one away to a friend 6, 7 years back. They weren't made in vast quantities to begin with.  Mine is probably the last one you will find in most places; haven't seen one on Ebay in at least 7 years. I'm not urging you to buy my 16 lb. one if you're using 15s, just stating what I know.

I'd get myself more Slingshots, if I were you, and try some Double Thumb or P4 weight hole drillings to increase the core strengths and the ball reaction, for a variation.
« Last Edit: February 05, 2014, 06:21:38 AM by charlest »
"None are so blind as those who will not see."

Brunswick_fan_BrandonH

  • Hero Member
  • *****
  • Posts: 786
Re: Slingshot, PK17 and Brunswick lately...
« Reply #8 on: February 05, 2014, 09:31:26 AM »
I would also suggest looking into the new LT 48 which has a similar reaction to the slingshot. It was made for when the lanes get dry and you need a ball that is going to get down lane but still have enough to read the friction.
Vise Staff Member

gradilonec

  • Full Member
  • ***
  • Posts: 172
Re: Slingshot, PK17 and Brunswick lately...
« Reply #9 on: February 05, 2014, 12:35:28 PM »
BRING BACK THE URETHANE! I dunno about most.  But I NEED a urethane piece.  High speed/High Rev = wicked back end and too much entry angle with most new gear.

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Re: Slingshot, PK17 and Brunswick lately...
« Reply #10 on: February 06, 2014, 07:35:56 AM »
Very intersted in your vengeance, but I have switched to 15lbs last year due to consistency issues. Will keep an eye out for this, looks rg and cover looks extremely my cup of tea.

I had been looking for them for years; gave my last 15 lb. one away to a friend 6, 7 years back. They weren't made in vast quantities to begin with.  Mine is probably the last one you will find in most places; haven't seen one on Ebay in at least 7 years. I'm not urging you to buy my 16 lb. one if you're using 15s, just stating what I know.

I'd get myself more Slingshots, if I were you, and try some Double Thumb or P4 weight hole drillings to increase the core strengths and the ball reaction, for a variation.

Yes, Il be getting a few more as backup since my local center will never change their wooden lanes. Even with my slingshot drilled very smooth, I still have to take care not to overhook the ball. Ill try and strong layout if they finally decide to oil the lanes properly instead of burnt wooden chopsticks.

jbkoala

  • Jr. Member
  • **
  • Posts: 53
  • Brunswick x Tokyo
Re: Slingshot, PK17 and Brunswick lately...
« Reply #11 on: February 06, 2014, 07:43:30 AM »
I would also suggest looking into the new LT 48 which has a similar reaction to the slingshot. It was made for when the lanes get dry and you need a ball that is going to get down lane but still have enough to read the friction.

Is the 3C cover stronger than PK17? I think this ball is intended to replace the Karma urethane yes?

baer300

  • Hero Member
  • *****
  • Posts: 541
Re: Slingshot, PK17 and Brunswick lately...
« Reply #12 on: February 06, 2014, 08:14:52 AM »
The LT48 is not to replace the Karma Urethane. The LT48 has a resin cover and is much stronger than the Karma. It is very clean and smooth down lane. Fits just below the Melee.
Adam Baer
Track Regional Staff
Vise Regional Staff

avabob

  • Hero Member
  • *****
  • Posts: 2778
Re: Slingshot, PK17 and Brunswick lately...
« Reply #13 on: February 07, 2014, 12:28:56 PM »
One of Brunswicks best dry lane balls ever was the old Battle Zone Cannon.  I think it had PK 17 or something similar.  Difference from many other dry lane balls is that it had a low rg symmetrical core and depended on the tame polished shell to handle the dry.  Result was a ball that was less over under than your typical pearl.  Because it was so rolly due to the low rg you could even play straight up the oil line and get it to hit.  It really matched up to my end over end style. 

That ball would be a great re release in todays environment where low axis rotation is so beneficial. 

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: Slingshot, PK17 and Brunswick lately...
« Reply #14 on: February 07, 2014, 01:19:04 PM »
One of Brunswicks best dry lane balls ever was the old Battle Zone Cannon.  I think it had PK 17 or something similar.  Difference from many other dry lane balls is that it had a low rg symmetrical core and depended on the tame polished shell to handle the dry.  Result was a ball that was less over under than your typical pearl.  Because it was so rolly due to the low rg you could even play straight up the oil line and get it to hit.  It really matched up to my end over end style. 

That ball would be a great re release in todays environment where low axis rotation is so beneficial. 

It wasn't plain PK 17; it was a special edition called, "PowerKoil 17XD (Extra Distance)"
I think it had less over/under for you because of your speed dominant release. Even Parker Bohn said it was one of the biggest backending balls Brunswick ever made at the time. It made a huge left turn for me also due to its high differential, .054". Even Brunswick said it had a "strong backend attack on the pins".
http://www.bowlwithbrunswick.com/downloads/info-sheets/Battle_Zone_Cannon.pdf
"None are so blind as those who will not see."