win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: How much surface does one need nowadays  (Read 4770 times)

Xcessive_Evil

  • Hero Member
  • *****
  • Posts: 1853
How much surface does one need nowadays
« on: January 07, 2010, 11:05:42 AM »
The PBA patterns are skimping on oil.  THS has a wall, all the while coverstocks are getting stronger and stronger.  I was in league yesterday, and a guy on the other team was using a Seige.  From what he says. it has as 30* 4.5 25* layout on it, and took it all the way down to 500.  

I often heard him complaining "This ball is crap, it's supposed to hook."  "My Rattler hooks more" etc, etc.  I tried telling him that with the coverstock, layout, and surface that he is killing all the energy, and that it's leaving nothing in the back.  He keeps using it, and shot I think 440 something with it(He averages 196 this year).  

For me, 2000 is as dull as it gets.  Why do some think we see enough oil to toss a snow tire?
--------------------
www.youtube.com/track8401

http://smg.photobucket.com/albums/v690/Phoenix_RsX/Arsenal/
Logged

 

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: How much surface does one need nowadays
« Reply #1 on: January 07, 2010, 07:28:38 PM »
Have to agree. Find myself using less surface and then less surface + polish, just to use medium oil balls. So sad.

--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."

pate08

  • Hero Member
  • *****
  • Posts: 877
Re: How much surface does one need nowadays
« Reply #2 on: January 07, 2010, 07:35:31 PM »
I don't have one polished ball. Polish doesn't read early enough and it gives over/under. Something with a little more surface evens out the reaction, helps it read a little sooner, and is just more controllable all together. I usually just use 1000 and 2000. On a harder/fresh shot, more surface is preferable to combat the fresh back ends and even out the reaction.
--------------------



Logged

themachine300

  • Hero Member
  • *****
  • Posts: 1410
Re: How much surface does one need nowadays
« Reply #3 on: January 07, 2010, 07:38:58 PM »
I throw 1000 all the time, nothing much duller than that.  i got a good amount of tilt so it helps me clear the fronts better
--------------------
www.bowlingsolutions.com

Bowl to win!!!

Move left, hook it more.....

Tommy Jones and Kenny Simard are Gamecock fans...are you???
Logged
Philipp Hudak
Ebonite Amateur Staff
Bowl To Win!
#TeamEBI

cheech

  • Hero Member
  • *****
  • Posts: 1360
Re: How much surface does one need nowadays
« Reply #4 on: January 07, 2010, 07:42:31 PM »
for a house shot i generally only have my benchmark with any type of surface and thats always been at 4000 then the rest is polished. on sport though (not just the PBA shots) anything goes
--------------------
HG:300x2(SR300 both)
HS:792(SR300)
sacred heart university bowling, soph.
greatest accomplishment:shooting 603 and not shooting one 200 game(130,173,300)...lol
balls for sale in my profile
p.s. go leftys
Logged

icewall

  • Hero Member
  • *****
  • Posts: 906
Re: How much surface does one need nowadays
« Reply #5 on: January 07, 2010, 07:42:54 PM »
depends on tilt.

for me 2000 is crazy strong as i have almost no tilt.
--------------------
tweener
350 revs
16 mph
low tilt
Logged

Xcessive_Evil

  • Hero Member
  • *****
  • Posts: 1853
Re: How much surface does one need nowadays
« Reply #6 on: January 07, 2010, 07:47:12 PM »
I know this is/should be based primarily on the bowlers style, but what he did imo is overkill.  I really started thinking about this again when I was watching the Shark Championship on TV.  For a pattern of that length and overall volume, it really didn't look like alot of surface was being used by any of the players.  In fact, some of them seemed to be polished.
--------------------
www.youtube.com/track8401

http://smg.photobucket.com/albums/v690/Phoenix_RsX/Arsenal/
Logged

charlest

  • Hero Member
  • *****
  • Posts: 24523
Re: How much surface does one need nowadays
« Reply #7 on: January 07, 2010, 08:06:14 PM »
quote:
depends on tilt.


And ball speed, of course.

quote:

for me 2000 is crazy strong as i have almost no tilt.
--------------------
tweener
350 revs
16 mph
low tilt

--------------------
"None are so blind as those who will not see."
Logged
"None are so blind as those who will not see."

LaneHammer20

  • Hero Member
  • *****
  • Posts: 1710
Re: How much surface does one need nowadays
« Reply #8 on: January 07, 2010, 08:30:53 PM »
quote:
depends on tilt.

for me 2000 is crazy strong as i have almost no tilt.
--------------------
tweener
350 revs
16 mph
low tilt


I am right there with you. I track high 5 3/4 by 1/2 up with low tilt as well these days. If I go below 2000 abralon it is burnout city. I prefer my equipment polished. My tilt has lowered quite a bit as of the last 6 months, along with my track moving up a 1/2 inch.

I can tuck my pinky and it helps my tilt go up, and allows me to play deeper better.
--------------------
What is sandbagging???

Logged

SleepOnIce

  • Hero Member
  • *****
  • Posts: 704
Re: How much surface does one need nowadays
« Reply #9 on: January 08, 2010, 10:17:31 AM »
I use weaker stuff with surface (Bash at 1000 abralon right now) on most house shots. In my PBAX league I'm mostly using a strongish pearl with a 2000 surface on anything over 38 feet.
--------------------
BLARGH
Rob Stone Supporters of America!
Logged

FBM357

  • Hero Member
  • *****
  • Posts: 1398
Re: How much surface does one need nowadays
« Reply #10 on: January 08, 2010, 10:51:21 AM »
quote:
quote:
depends on tilt.


And ball speed, of course.

quote:

for me 2000 is crazy strong as i have almost no tilt.
--------------------
tweener
350 revs
16 mph
low tilt

--------------------
"None are so blind as those who will not see."


Most definitely ... majority of my stuff is a) polished and b) 4000.  Have a few pieces where surface is 1000-2000 (for league in another house with sport shot).  My AMF Code @ 4000 polished is quite strong!!!
Logged

67tbird

  • Full Member
  • ***
  • Posts: 107
Re: How much surface does one need nowadays
« Reply #11 on: January 08, 2010, 11:19:26 AM »
I know what you're saying! I bought a Motiv TR2 a while back, just to try them out... got a good deal on it, so I didn't really look at what it was made for or anything (stupid I know)... but when I got it, I didn't even think about throwing it out of box, it got some polish. Drilled pin about an inch above my ring finger with the CG kicked 20 degrees right, I ended up having to take it to 4000 abralon and polishing it just so I could use it on our house shot.
Logged

Oskuposer

  • Hero Member
  • *****
  • Posts: 1386
Re: How much surface does one need nowadays
« Reply #12 on: January 08, 2010, 11:26:09 AM »
Condition, condition, and surface.  Using a dull ball on guardian is like running a marathon in the desert with a parka on and no water.  Some houses generally work with rougher surfaces some with polished some with both some where outside works better and sometimes inside works better.  It is all dependent on the variables used in your game, lane surface, pattern, that affects what you should do to your equipment.
--------------------
Kiall Hill
Visionary test staff
Logged

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: How much surface does one need nowadays
« Reply #13 on: January 08, 2010, 02:24:51 PM »
Surface is a friend to players with low axis tilt (spinners).  --  JohnP
Logged

dizzyfugu

  • Hero Member
  • *****
  • Posts: 7605
Re: How much surface does one need nowadays
« Reply #14 on: January 12, 2010, 02:30:04 AM »
quote:
Surface is a friend to players with low axis tilt (spinners).  --  JohnP


Yup. Surface must always be seen in connection to the player''s style. A low tracker will definitively need more surface on the same condition than a high tracker, esp. on oilier lanes.

Being a high trcaker myself, my strongest recative for medium to medium-oily shots is a FMG at 1.500 grit. It still needs oil up front, and hooks a lot. I could probably not use it at all at 1.000 matte or even more surface!
Even my heavy oil ball, an NS², is only at lightly sanded 1.500 grit - the ball builds up its traction through the high particle load and the early rolling setup. It needs the sheen surface to arrive in the mid lane "alive" at all!

But I agree that modern coverstock materials have become so aggressive that...
a) a fine grit already is enough to make a ball work properly that would have been truly matte a couple of years ago, and
b) this also affects the utility of polish - many modern polished balls are so jumpy or condition-specific (the Virtual Gravity seems to be such a case, the Radical Inferno another I remember) that using them is hit or miss. A fine sanded surface or rubbing compounds make them much more useable.
--------------------
DizzyFugu - Reporting from Germany

Confused by bowling? Check out BR.com''s vault of wisdom: the unofficial FAQ section

Edited on 1/12/2010 3:32 AM
Logged
DizzyFugu ~ Reporting from Germany
Pages: [1] 2
« previous next »