win a ball from Bowling.com
« previous next »
Pages: [1] 2 3

Author Topic: Lowest grit  (Read 16295 times)

JohnN

  • Sr. Member
  • ****
  • Posts: 311
Lowest grit
« on: February 07, 2017, 12:02:37 PM »
What is the lowest grit you would use on a non-polished ball ?
Logged

 

NeverLearn

  • Full Member
  • ***
  • Posts: 103
Re: Lowest grit
« Reply #1 on: February 07, 2017, 12:23:53 PM »
Quote from: JohnN on February 07, 2017, 12:02:37 PM
What is the lowest grit you would use on a non-polished ball ?

I would imagine anything less than a 1000 grit FEPA is going to do a lot of damage to the lane surface, even with a lot of oil.
Logged

Jesse James

  • Hero Member
  • *****
  • Posts: 3604
Re: Lowest grit
« Reply #2 on: February 07, 2017, 12:26:16 PM »
Quote from: NeverLearn on February 07, 2017, 12:23:53 PM
Quote from: JohnN on February 07, 2017, 12:02:37 PM
What is the lowest grit you would use on a non-polished ball ?

I would imagine anything less than a 1000 grit FEPA is going to do a lot of damage to the lane surface, even with a lot of oil.

Yup!! ^^^^^^^^^^^^^^^^^^What the "Old Vet" with the new handle said!  ;)
Logged
Some days you're the bug....some days you're the windshield...that's bowling!

Good Times Good Times

  • Hero Member
  • *****
  • Posts: 6462
  • INTJ Personality
Re: Lowest grit
« Reply #3 on: February 07, 2017, 12:27:20 PM »
For me, it would be 1000 grit.
Logged
GTx2

LookingForALeftyWall

  • Hero Member
  • *****
  • Posts: 658
Re: Lowest grit
« Reply #4 on: February 07, 2017, 01:47:18 PM »
Using Abralon pads, I will go as low as 500. 

Currently, the lowest grit in my arsenal is a 500/1000 surface on an Alpha Crux that does not see house shots. 
Logged

bcw1969

  • Hero Member
  • *****
  • Posts: 548
Re: Lowest grit
« Reply #5 on: February 07, 2017, 04:15:05 PM »
I have experimented with grits and for certain tournaments that typically have very   heavy oil or reverse block type appearance for me,  I have gone very low.....150 grit, 120, 100, 80, 60 , 40, 24, and 12.......Although at 12 grit didn't have much success.....when I put my midnight scorcher to 12 a number of years ago--back when it had just a standard drilling on it, it would exit the out of bounds but just roll out and go straight to the 2 pin(lefty).  The one big money tournament I was blessed enough to win----the 2010 U.B.A. Memorial Day Classic , I won the 10,000 first place prize money using a Brunswick dry zone solid on my first ball at 24 grit--not a typo 24 grit. Lately...at least since I discovered the 320 degree hook set drilling, I have found that I can get a similar aggressive move in the oil while being able to go a little bit higher in the grit level on any particular ball.

Brad
Logged

storybook123

  • Full Member
  • ***
  • Posts: 162
Re: Lowest grit
« Reply #6 on: February 07, 2017, 08:52:26 PM »
Quote from: bcw1969 on February 07, 2017, 04:15:05 PM
I have experimented with grits and for certain tournaments that typically have very   heavy oil or reverse block type appearance for me,  I have gone very low.....150 grit, 120, 100, 80, 60 , 40, 24, and 12.......Although at 12 grit didn't have much success.....when I put my midnight scorcher to 12 a number of years ago--back when it had just a standard drilling on it, it would exit the out of bounds but just roll out and go straight to the 2 pin(lefty).  The one big money tournament I was blessed enough to win----the 2010 U.B.A. Memorial Day Classic , I won the 10,000 first place prize money using a Brunswick dry zone solid on my first ball at 24 grit--not a typo 24 grit. Lately...at least since I discovered the 320 degree hook set drilling, I have found that I can get a similar aggressive move in the oil while being able to go a little bit higher in the grit level on any particular ball.

Brad

24 grit holy cow  :o
Logged

bcw1969

  • Hero Member
  • *****
  • Posts: 548
Re: Lowest grit
« Reply #7 on: February 07, 2017, 08:59:26 PM »
it actually worked that weekend......The dry zone solid is a dry lanes ball...but with that rough a grit I was able to play in the oil/oob around the 1st arrow...and if I pulled it, it went right past the 1-2 pocket(lefty) and went straight for the 1-3 pocket for a Brooklyn strike, no dead center splits at all. If I missed a little left the gritty cover didn't leave me any "weird" unmake-able spares. For that situation it indeed worked.

Brad
Logged

northface28

  • Hero Member
  • *****
  • Posts: 3333
Re: Lowest grit
« Reply #8 on: February 07, 2017, 09:16:39 PM »
Quote from: bcw1969 on February 07, 2017, 04:15:05 PM
I have experimented with grits and for certain tournaments that typically have very   heavy oil or reverse block type appearance for me,  I have gone very low.....150 grit, 120, 100, 80, 60 , 40, 24, and 12.......Although at 12 grit didn't have much success.....when I put my midnight scorcher to 12 a number of years ago--back when it had just a standard drilling on it, it would exit the out of bounds but just roll out and go straight to the 2 pin(lefty).  The one big money tournament I was blessed enough to win----the 2010 U.B.A. Memorial Day Classic , I won the 10,000 first place prize money using a Brunswick dry zone solid on my first ball at 24 grit--not a typo 24 grit. Lately...at least since I discovered the 320 degree hook set drilling, I have found that I can get a similar aggressive move in the oil while being able to go a little bit higher in the grit level on any particular ball.

Brad


This is ridiculous.
Logged
NLMB 150 Dream Team
#NoTalking
#HellaBandz

JohnN

  • Sr. Member
  • ****
  • Posts: 311
Re: Lowest grit
« Reply #9 on: February 07, 2017, 11:57:15 PM »
Have never seen grit that low before. Lowest grit wet dry paper I've seen was 80.
Logged

bcw1969

  • Hero Member
  • *****
  • Posts: 548
Re: Lowest grit
« Reply #10 on: February 08, 2017, 05:39:02 AM »
An oil pattern is simply a puzzle, and because bowlers are all different, there can be multiple solutions to this puzzle...the solution for one may not be the solution for another. I'd bowl between my legs and backwards if I thought it would win me $10,000. One thing that Earl Anthony said in his book that I had years ago...might have been :super bowling" , forget the title but he said "are we playing how, or how many?"


Brad
Logged

htotheizzo3561

  • Hero Member
  • *****
  • Posts: 962
Re: Lowest grit
« Reply #11 on: February 08, 2017, 09:53:03 AM »
I've sanded to 220 before and the ball surface looked scarred not sure how much good that does for ball reaction. 

12 grit! wow next step is to sand with a metal file. 
Logged

milorafferty

  • Hero Member
  • *****
  • Posts: 11153
  • I have a name, therefore no preferred pronouns.
Re: Lowest grit
« Reply #12 on: February 08, 2017, 10:05:42 AM »
Quote from: htotheizzo3561 on February 08, 2017, 09:53:03 AM
I've sanded to 220 before and the ball surface looked scarred not sure how much good that does for ball reaction. 

12 grit! wow next step is to sand with a metal file. 

A metal file wouldn't even do that much damage. Maybe a wood rasp would.
Logged
"If guns kill people, do pencils misspell words?"

"If you don't stand for our flag, then don't expect me to give a damn about your feelings."

Impending Doom

  • Hero Member
  • *****
  • Posts: 6288
Re: Lowest grit
« Reply #13 on: February 08, 2017, 10:44:05 AM »
Quote from: northface28 on February 07, 2017, 09:16:39 PM
Quote from: bcw1969 on February 07, 2017, 04:15:05 PM
I have experimented with grits and for certain tournaments that typically have very   heavy oil or reverse block type appearance for me,  I have gone very low.....150 grit, 120, 100, 80, 60 , 40, 24, and 12.......Although at 12 grit didn't have much success.....when I put my midnight scorcher to 12 a number of years ago--back when it had just a standard drilling on it, it would exit the out of bounds but just roll out and go straight to the 2 pin(lefty).  The one big money tournament I was blessed enough to win----the 2010 U.B.A. Memorial Day Classic , I won the 10,000 first place prize money using a Brunswick dry zone solid on my first ball at 24 grit--not a typo 24 grit. Lately...at least since I discovered the 320 degree hook set drilling, I have found that I can get a similar aggressive move in the oil while being able to go a little bit higher in the grit level on any particular ball.

Brad


This is ridiculous.

#parkinglotgrit
Logged

CoorZero

  • Hero Member
  • *****
  • Posts: 1245
Re: Lowest grit
« Reply #14 on: February 08, 2017, 10:47:09 AM »
What does a ball at 12 or 24 grit look like?
Logged
Pages: [1] 2 3
« previous next »