win a ball from Bowling.com

Author Topic: Making a spinner  (Read 6165 times)

wulfpackbwlr

  • Sr. Member
  • ****
  • Posts: 493
Making a spinner
« on: June 11, 2006, 12:55:25 PM »
A friend of mine is going to make me a ball spinner for me as a wedding/ moving away gift.  He doesnt know what type of motor to get though.  Could someone who has made one or knows what to use please let me know.  

Nick
--------------------
Nevermind the slump anymore.  Dropped to 15 lbs again and havent shot below 650 in a month now with 4 720+

 

tjj300

  • Hero Member
  • *****
  • Posts: 855
Re: Making a spinner
« Reply #1 on: June 11, 2006, 10:16:14 PM »
Washing Machine motor works pretty good.


--------------------
The pacifist is as surely a traitor to his country and to humanity as is the most brutal wrongdoer.
--Theodore Roosevelt

stanski

  • Hero Member
  • *****
  • Posts: 2709
Re: Making a spinner
« Reply #2 on: June 12, 2006, 12:06:09 AM »
Many people have all the parts around the garage or they can pick them up at a dump, so literally it could cost you as little as $10 or so in actual costs. When you factor in the labor though, it will obviously be a bit more (as it took a friend of mine 8 hours to make his). Depends on how much of a do it yourselfer you are whether you want to buy a spinner or make one.
--------------------
stanski

star

  • Hero Member
  • *****
  • Posts: 824
Re: Making a spinner
« Reply #3 on: June 12, 2006, 07:38:02 AM »
Cost of mine was about £7 ($10). Everything else I either had or got for free.
A lot of thought went into it but I feel I have had 3 to 4 years of great use out of it up to now.
Dont just fly in and start without fully thinking it all through, that would be my only advice.
Great project for anyone who can do DIY.A tumble dryer motor worked best for me with its salvaged electrical on/off switch.
Only drawback is that its not transportable. Think of that if you travel to bowl in competitions.
--------------------
Happy go lucky bowler from the UK.
   Did someone say tough luck
 Want to learn to read lanes then visit:-
      www.thebowlingprofessor44.com/
Happy go lucky bowler from the UK.
Specs. 430rpm,18mph off hand. 11-12deg Tilt, 50-60 deg Rotation. PAP 5 1/4 by 3/4 up.
                   R.I.P.
Mo Pinel. The Guru.
Larry Matthews “The Bowling Professor”
Sawbones.
Thong Princess.
Thanks for the FUN times.

wulfpackbwlr

  • Sr. Member
  • ****
  • Posts: 493
Re: Making a spinner
« Reply #4 on: June 12, 2006, 05:28:14 PM »
My friend mentioned a washing machine motor.  I'll pass that and the tumble dryer motor ideas to him.  Transporting doesnt matter as I wont be taking it to competitions or anything like that.  Just looking for an easier way for me to change the surface of the bowling balls I have.  Thanks for the help everyone.

Nick
--------------------
Nevermind the slump anymore.  Dropped to 15 lbs again and havent shot below 650 in a month now with 4 720+

oilhog2

  • Jr. Member
  • **
  • Posts: 14
Re: Making a spinner
« Reply #5 on: August 13, 2006, 11:47:22 AM »
my spinner cost my dad nothing to make he just found all this old junk at his work and a motor from rap and threw it together it works wonders
the ball part is a gear box cover from a snow mobile
--------------------
F.O.S!!! to tha BONE!
high game 288
high series 717

pearl uranium
hybrid dirty bomb
H2O
super carbide bomb
tsunami H2O
red XXXL
cobalt

Joe Jr

  • Hero Member
  • *****
  • Posts: 2776
Re: Making a spinner
« Reply #6 on: August 13, 2006, 11:54:24 AM »
It's so not worth it IMO. You can buy them for $150.
--------------------
- Joe
Formerly Richard Cranium

www.Brunswickbowling.com
www.Brunswickinsiders.com

Edited on 7/21/2005 1:21 PM

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Making a spinner
« Reply #7 on: August 13, 2006, 12:06:17 PM »
Can't wait until the Darwin Awards feature some redneck that decided to build his own spinner...
--------------------
"A word to the wise ain't necessary -- it's the stupid ones that need the advice."  Bill Cosby
"Never argue with an idiot. They bring you down to their level and beat you with experience."

triggerman

  • Hero Member
  • *****
  • Posts: 3352
Re: Making a spinner
« Reply #8 on: August 13, 2006, 12:41:35 PM »
a ball spinner is easy to build

to answer your question, a washing machine motor works the best, 110 volt, and two speeds

on a side note, even the "$150.00" ones look homemade

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Making a spinner
« Reply #9 on: August 13, 2006, 01:03:12 PM »
quote:
a ball spinner is easy to build

to answer your question, a washing machine motor works the best, 110 volt, and two speeds

on a side note, even the "$150.00" ones look homemade


There's a significant difference between "homemade" and redneck tech...
--------------------
"A word to the wise ain't necessary -- it's the stupid ones that need the advice."  Bill Cosby
"Never argue with an idiot. They bring you down to their level and beat you with experience."

smash8-10split

  • Hero Member
  • *****
  • Posts: 2030
Re: Making a spinner
« Reply #10 on: August 13, 2006, 01:06:26 PM »
where can you get them for 150? thats my ?
--------------------
amf300, all the way!

shelley

  • Hero Member
  • *****
  • Posts: 9655
Re: Making a spinner
« Reply #11 on: August 13, 2006, 01:27:37 PM »
quote:
Can't wait until the Darwin Awards feature some redneck that decided to build his own spinner..


You could try using an old lawn mower motor.  Has the advantage that it's gas powered and will work even when the electricity goes out.

SH

legend4life95

  • Hero Member
  • *****
  • Posts: 3802
Re: Making a spinner
« Reply #12 on: August 13, 2006, 01:29:40 PM »
I paid $200 shipped from buddies a couple years ago and I can say its the best $200 I've ever spent on bowling equipment. Why try to put a bunch of junk together and make a bootleg spinner? If you don't have $200 bucks to spend on bowling then just quit the sport now!

--------------------


****Kids in the back seat cause accidents; accidents in the back seat cause kids.****

wulfpackbwlr

  • Sr. Member
  • ****
  • Posts: 493
Re: Making a spinner
« Reply #13 on: August 13, 2006, 05:10:14 PM »
That last comment wasnt exactly necessary.  So if someone can make one for say $40 that doesnt happen to have the $200 at that time to spend then they should just quit.  So I guess the guys that still use older equipment yet still have the physical and mental game to shoot high scores with what they have should quit as well right?  I'm a college student therefor I dont have much money.  I'm sorry that I was able to get a washing machine motor, a couple pulleys, a power steering belt for $40, save $160 and have a spinner that works better than some that I have used in pro shops.  Not mad or anything, that money comment was not necessary.
--------------------
NCSU 2006
All Dyno-Thane

Joe Jr

  • Hero Member
  • *****
  • Posts: 2776
Re: Making a spinner
« Reply #14 on: August 13, 2006, 05:20:05 PM »
There not as easy to make as you'd think. Sure you can get everything pretty cheap, but good luck not getting to shake. Because if it shakes hard enough it WILL throw the ball out off the cup, which hurts, I've had one fly outat me once.

Buddiesproshop has them for $200 with free shipping, save yourself the trouble and pick one up there.
--------------------
- Joe
Formerly Richard Cranium

www.Brunswickbowling.com
www.Brunswickinsiders.com

Edited on 7/21/2005 1:21 PM