Author Topic: whats the best product or method to bring kinetic back to life (Read 2240 times)

armswing · « **on:** July 29, 2008, 02:03:42 AM »

I have a kinetic and I would like to bring it back to how it was when purchased.How would I do that? And what product should I use?
--------------------
ARMSWING

Grayson · « **Reply #1 on:** July 29, 2008, 10:54:23 AM »

hot water bath if the oil is an issue... if it is bringin it to OOB? I have no plan....
--------------------
Sebastian Koch
"Have fun and bowl well!" - Grayson
"Some things are made so even idiots won't fail using them.... But I ask what about the genius?" - Grayson

(\_/)
(x_x)
c(')(')

Unoffical Ballreviews.com FAQ
Hot Water Bath - instructions and experience

Bowling lessons and tips VIDEOS - VERY GOOD!

Gazoo · « **Reply #2 on:** July 29, 2008, 11:13:08 AM »

Take the ball down to 500grit abralon and give it hot water bath treatment till all the oil is out. Then take the ball up to first 1000grit and then 2000grit. Then apply Powerhouse Factory Finish and your back to factory OOB.

armswing · « **Reply #3 on:** July 29, 2008, 11:19:03 AM »

Thanks guys for the info. I tried the hot water bath on my beloved v2 sanded and as I was dryimg it off I realized that I had cracked the ball. having read the hot water bath instructions I now realize my water was a tad to hot. read a thread about a product by valentino called ressurection resurfacing how does this stuff work?
--------------------
ARMSWING

Brickguy221 · « **Reply #4 on:** July 29, 2008, 11:24:20 AM »

quote:
read a thread about a product by valentino called ressurection resurfacing how does this stuff work?

Armswing....that is the best stuff made ever since Beer was invented. There have been several treads posted about it.
--------------------
"Whenever I feel the urge to exercise I lie down until the feeling passes away."

Brick

armswing · « **Reply #5 on:** July 29, 2008, 11:34:54 AM »

thanks brickguy is that stuff pretty easy to use? I have a old single speed ball spinner or can I do it by hand?
--------------------
ARMSWING

FBM357 · « **Reply #6 on:** July 29, 2008, 11:44:39 AM »

quote:
thanks brickguy is that stuff pretty easy to use? I have a old single speed ball spinner or can I do it by hand?
--------------------
ARMSWING

extremely easy to use

If you go to their website, you'll find a short video in regards to using/applying their products. Grab a sample pack and give it a try. Trust me, you'll be pleased with the end results (may want to grab the 4oz package instead of sample

-- they offer 5% off purchase $15.00 or more if you decide to purchase - check the following link http://valentinobowling.com/vbr.html
)

Hope this helps.

V
--------------------
Hustle (Me) and Flow (Sixcranker)

Proud member of the Track Revolution - EMERITUS & Hitman

"If you teach someone to think they're thinking, they will love you. If you teach someone to think, they will hate you!!!"

Edited on 7/29/2008 11:51 AM

armswing · « **Reply #7 on:** July 29, 2008, 11:57:28 AM »

thanks fbm357 I could of saved you some time had I just read down a bit further on the coverstock page thanks to you all. armswing out
--------------------
ARMSWING

Author Topic: whats the best product or method to bring kinetic back to life (Read 2240 times)

armswing

whats the best product or method to bring kinetic back to life

Grayson

Re: whats the best product or method to bring kinetic back to life

Gazoo

Re: whats the best product or method to bring kinetic back to life

armswing

Re: whats the best product or method to bring kinetic back to life

Brickguy221

Re: whats the best product or method to bring kinetic back to life

armswing

Re: whats the best product or method to bring kinetic back to life

FBM357

Re: whats the best product or method to bring kinetic back to life

armswing

Re: whats the best product or method to bring kinetic back to life