win a ball from Bowling.com

Author Topic: Ball plug preferences  (Read 4867 times)

Greg T

  • Hero Member
  • *****
  • Posts: 19916
  • Collateral Damage
Ball plug preferences
« on: September 12, 2008, 01:59:20 AM »

 Just wondering what everyone's preference is for ball plug. I've had my experience with the 15 minute quick plug and now want something more reliable. I'm looking for best bang for the buck. Gotta keep the price down.


AllBowling.com Off-Ramp!           

 

hammermike2000

  • Hero Member
  • *****
  • Posts: 766
Re: Ball plug preferences
« Reply #1 on: September 12, 2008, 10:10:48 AM »
Not sure of the price, but out of the brands our shop has used, HD is the best.  

--------------------

The Right Approach Pro Shop, Charlotte, NC


qstick777

  • Hero Member
  • *****
  • Posts: 5188
Re: Ball plug preferences
« Reply #2 on: September 12, 2008, 10:19:42 AM »

I started with some quick set stuff (not official "ball plug") that did fine, but not the most professional results - still, it was cheaper than the "real" quick ball plug.

I eventually end up buying this package.  It seemed like the best bang for the buck since it includes the color kit, the pumps (which are usually $20 extra), finger/thumb dams, and the cups and sticks.

I haven't had any problems with it and have been using it for a little over a year.  I haven't plugged much lately, and I'm not sure of the shelf life, but you might want to take that into consideration.
--------------------
Unoffical Ballreviews.com FAQ

Search Ballreviews entire database here

azguy

  • Hero Member
  • *****
  • Posts: 8364
Re: Ball plug preferences
« Reply #3 on: September 12, 2008, 10:33:17 AM »
Ebonite is a good plug. I prefer TechLine HD. The temp is not so touchy. There's a few nights the heater didn't kick on as it should and the Ebonite is temp sensitive, took longer than I thought to harden. Never had a problem with the TechLine HD. Couple years ago the pilot blew out ( high winds) and it got under 55 degrees. The TechLine set as timed, worked great and no problems. It is a bit more I think than Ebonite but temp and shelf life is less important and longer shelf life, from what I've experienced.

Colors ( TechLine) mix well with both, forgot to mention.
--------------------
az guy aka: R & L Bowlers Pro
  rlbowlerspro@cox.net




Greg T

  • Hero Member
  • *****
  • Posts: 19916
  • Collateral Damage
Re: Ball plug preferences
« Reply #4 on: September 12, 2008, 11:10:28 AM »

 Well, I still have a lot of the 15 minute stuff left, but I guess it has a shelf life. When I use it now it turns to foam and when it sets up it's FULL of pinholes. Like sandpaper. So, I was looking to get something better but this year my budget is limited. I found Wizard plug that sets up in 1 hour. Anyone ever use it?


AllBowling.com Off-Ramp!           

the pooh

  • Hero Member
  • *****
  • Posts: 615
Re: Ball plug preferences
« Reply #5 on: September 12, 2008, 03:40:52 PM »
Wizard is great,as long as color match isn't important! It doesn't color well and you MUST use their color kit(it is expensive).It is the best for redoing, say, a thumb in the same place.Works out the best of any I've used.
--------------------
the pooh
the pooh

stormed1

  • Hero Member
  • *****
  • Posts: 1755
Re: Ball plug preferences
« Reply #6 on: September 12, 2008, 04:17:08 PM »
I prefer the Techline hands down. Like stated earlier the Ebonite plug is much too sensitive to temp and stirring time for my tastes. I still keep some around for ball repairs but that's it.
Current arsenal


Break Down 60x4.5x60 @3k+polish
coming soon X,Desert Ops,Special Ops, Shadow Ops., Truth Pearl ,Drift

Crankenstein300

  • Hero Member
  • *****
  • Posts: 1296
Re: Ball plug preferences
« Reply #7 on: September 12, 2008, 05:50:59 PM »
Another vote for Techline although I admit to not having tried the Ebonite.

Greg T

  • Hero Member
  • *****
  • Posts: 19916
  • Collateral Damage
Re: Ball plug preferences
« Reply #8 on: September 12, 2008, 10:48:24 PM »

  Where is the best place to buy. I don't have a tax license so it will have to be normal channels.


--------------------
If yer arm don't hurt ya ain't shiftin it right!
 

RESEARCH!   Don't be a maroon!!.


 
AllBowling.com Off-Ramp!           

Doug Sterner

  • Hero Member
  • *****
  • Posts: 4395
Re: Ball plug preferences
« Reply #9 on: September 13, 2008, 08:51:44 AM »
I started off using the DBA 321 and it was good. I then tried the 321 Pro Plug quick set stuff and it was horrible. I switched over to TechLine HD and fell in love.

However one day I needed plug and my supplier was out of TechLine so I tried the Ebonite EverClear....wow! I thought TechLine was good to match color with bu this stuff is way better.

I think I am on gallon #20 of EverClear now....it surely gets my vote.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY

http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
Doug Sterner
Doug's Pro Shop
Owego, NY

Proud Member of the NRA
Fighting to uphold the Constitution of the U.S.

Greg T

  • Hero Member
  • *****
  • Posts: 19916
  • Collateral Damage
Re: Ball plug preferences
« Reply #10 on: September 13, 2008, 10:10:02 PM »
quote:
I started off using the DBA 321 and it was good. I then tried the 321 Pro Plug quick set stuff and it was horrible. I switched over to TechLine HD and fell in love.

However one day I needed plug and my supplier was out of TechLine so I tried the Ebonite EverClear....wow! I thought TechLine was good to match color with bu this stuff is way better.

I think I am on gallon #20 of EverClear now....it surely gets my vote.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY

http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling



 Thanx, Doug. Is there something nearly as good that sets up quicker? I don't need the 15 minute stuff, but an hour or two would be great!




--------------------
If yer arm don't hurt ya ain't shiftin it right!
 

RESEARCH!   Don't be a maroon!!.


 
AllBowling.com Off-Ramp!           

BuddiesProShopcom - Bill

  • Sr. Member
  • ****
  • Posts: 494
Re: Ball plug preferences
« Reply #11 on: September 13, 2008, 10:21:57 PM »
We use Tech-Line.  We use Ultimate Quick Plug for making thumb molds.

I find that quick plug is great for fixing a mistake or someone that isn't willing to wait.
--------------------
Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"
Thanks
Bill
BuddiesProShop.com
"The Place All Bowlers Shop"

Doug Sterner

  • Hero Member
  • *****
  • Posts: 4395
Re: Ball plug preferences
« Reply #12 on: September 14, 2008, 09:37:05 AM »
Wizard is the best quick plug I have found.....I don't use it much but when someone needs a quickie fix then I at least have an alternative for them.
--------------------
Doug Sterner
Doug's Pro Shop
Owego, NY

http://dougsproshop@aol.com
www.dougsproshop.net
Lane 1 Buzzsaw...The Official Power Tool Of Bowling
Doug Sterner
Doug's Pro Shop
Owego, NY

Proud Member of the NRA
Fighting to uphold the Constitution of the U.S.

Guined

  • Full Member
  • ***
  • Posts: 203
Re: Ball plug preferences
« Reply #13 on: September 16, 2008, 04:22:59 PM »
I use Ebonite's Ultra Safe and have not had one problem with it. Cuts very well with a plug cutter and drills great. Never had it chip or have been compromised by temperature.
--------------------
Rick Guined

Track Regional Staff Player
Vise PBA Regional Staff Player
www.trackbowling.com


Greg T

  • Hero Member
  • *****
  • Posts: 19916
  • Collateral Damage
Re: Ball plug preferences
« Reply #14 on: September 19, 2008, 03:47:33 PM »

 Found Wizard complete 2 gallon kit at Jayhawk for $133.00. Includes the pumps and a black tint. Not bad.




--------------------
If yer arm don't hurt ya ain't shiftin it right!
 

RESEARCH!   Don't be a maroon!!.


 
AllBowling.com Off-Ramp!