win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: RESULTS: The ONE & Hot Water Treatment  (Read 7744 times)

Ramtart

  • Hero Member
  • *****
  • Posts: 1658
RESULTS: The ONE & Hot Water Treatment
« on: March 10, 2006, 03:46:11 AM »
Hey guys, just wanted to let you know the results after I put The One in a
pale of Hot Water for 15 minutes. I have two of them, but the one I dipped
in hot water is scuffed at approximately 800 grit surface. I decided to do
this, because of its' oil absorption capabilities as advertised.

Ball had about 35-40 games on it before the treatment.

When I came back after about 15 minutes, you could see the oil floating to
the top. I removed the ball and it was pretty greasy hehe.

I dried it off with a towel and emptied the bucket. Man you could smell the
oil. I had to wash the bucket with some detergent hehe.

Results on the lanes 30 minutes later during league:
After a few shots, I noticed a considerable difference overall.
The ball was reading the mids better and I saw new life in its' backend reaction.
I noticed a lot of flare as well.

I guess it is mission accomplished. I have done the Hot water treatment with some of my other equipment and it has worked well so far.

If you are hesistant to put The One in Hot Water, I hope this report helps you in getting a better picture of what happens during this process.

Take care everyone,
Ram
--------------------
Food is good for you!

Edited on 3/10/2006 11:46 AM
Logged

 

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #1 on: March 10, 2006, 11:48:56 AM »
Ramtart--Did you also add some Dawn?

Yours results are basically the same I have found with DT balls with their "soaker" cover.
--------------------
Scott

Logged
Scott

Ramtart

  • Hero Member
  • *****
  • Posts: 1658
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #2 on: March 10, 2006, 11:51:44 AM »
Hey Scott,

Funny thing. I didn't use dawn this time. I should've tried though.
What is the process? Should I put a few drops in the water or apply
it directly to the ball and then dip the ball in?

Thanks! Ram
--------------------
Food is good for you!
Logged

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #3 on: March 10, 2006, 11:58:01 AM »
I just use a table spoon of Dawn in a 5 gal pail of as hot a tap water that comes from the faucet.  Dump the ball in.  

My DT Thing and TR have many, many games on them.  Same basic reaction as new.  

I use a cleaning regimen of Legends ball cleaner after bowling to remove as much dirt and grime.  Then, hot water soak after 50 games.  

I use Dawn cuz Phil Cardinale said that was what he recommended.  Simple Green can leave a film.
--------------------
Scott

Logged
Scott

splendorlex

  • Hero Member
  • *****
  • Posts: 4484
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #4 on: March 10, 2006, 12:20:44 PM »
Do you have to stopper up the holes in some way, or what is the process?
Logged

the pizz

  • Hero Member
  • *****
  • Posts: 513
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #5 on: March 10, 2006, 05:30:36 PM »
a few years ago i left  a tote in the rain... needless to say the balls weighed over 17 lbs and rolled really funny
--------------------
Paul Smith
04/05 PBA West Region Rookie of the Year
Ebonite Regional Staff
"Bowl to Win"
Logged

a_ak57

  • Hero Member
  • *****
  • Posts: 10584
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #6 on: March 10, 2006, 05:45:16 PM »
quote:
why bother covering up the holes?  what does it hurt to get some water in them?  I can't beleive it wouldn't dry out.
--------------------
Brunswick,Lane#1,Morich,Hammer,Ebonite,Columbia,AMF,Storm,RotoGrip,Track......they all leave ten pins, I swear after I try dynothane and lanemaster if the ten pin is still there I might begin to think it might just be
 me...... (finally decided to add a signature)

I think the point is because if the water is hot enough, it will heat up the core.  And since the ball is made of different materials that expand and contract at different rates, it could separate.  Not sure if anyone has had that happen but it's the "better safe than sorry" approach.
--------------------
- Andy
Logged

TTforshort

  • Hero Member
  • *****
  • Posts: 2053
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #7 on: March 10, 2006, 05:56:24 PM »
I have had good results with all brands of balls in a hot water bath. I have also used the dishwasher.

I have never covered the finger holes and never had a problem with water left over. I carefully dry the holes and never use the balls the same day because a little dampness remains.

TT
--------------------
"Following the course of least resistance makes for crooked rivers and crooked men."
Logged
“A word to the wise ain’t necessary — it’s the stupid ones that need the advice.”

Connor

  • Jr. Member
  • **
  • Posts: 61
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #8 on: March 10, 2006, 05:57:52 PM »
Well I know I have posted this before...

DISHWASHER!!!

it is way easier...   just make sure you turn off the dry cycle, and have the holes facing down, so they dont retain water...   wait about 12 hours for all the water to dry out.  Use regular dishwasher detergent, it is an excellent degreaser.  As far as the core sep,  never had it happen, and I have done this with at least 15 different balls from all companies except brunswick (I have never owned a brunswick ball) and I have been doing for over 5 years....

It definatley works...

Logged

charlest

  • Hero Member
  • *****
  • Posts: 24524
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #9 on: March 10, 2006, 08:15:49 PM »
quote:
why bother covering up the holes?  what does it hurt to get some water in them?  I can't beleive it wouldn't dry out.
--------------------
Brunswick,Lane#1,Morich,Hammer,Ebonite,Columbia,AMF,Storm,RotoGrip,Track......they all leave ten pins, I swear after I try dynothane and lanemaster if the ten pin is still there I might begin to think it might just be
 me...... (finally decided to add a signature)


Because some core are able to absorb water. Then in extremes of heat and/or cold, you get different expansion and compression rates from core and cover, which can lead to a build up of pressure, which can lead to  _____.

Let's face it- it takes 2 seconds to be careful and have the holes face up or cover or plug them with something, like waterproof tape. Why go throw all the trouble of trying to revivify a ball and then do something not smart.
--------------------
"...for advice is a dangerous gift, even from the wise to the wise...."
J. R. R. Tolkien
Logged
"None are so blind as those who will not see."

charlest

  • Hero Member
  • *****
  • Posts: 24524
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #10 on: March 10, 2006, 08:18:09 PM »
quote:
Hey Scott,

Funny thing. I didn't use dawn this time. I should've tried though.
What is the process? Should I put a few drops in the water or apply
it directly to the ball and then dip the ball in?

Thanks! Ram
--------------------
Food is good for you!


just put it in the hot water. It's job is strictly to keep the oil in solution by breaking it up. just like it does for household grease and oil. Wipe the ball off immediately with paper towels or terry cloth towels.

KISS!
--------------------
"...for advice is a dangerous gift, even from the wise to the wise...."
J. R. R. Tolkien
Logged
"None are so blind as those who will not see."

Ramtart

  • Hero Member
  • *****
  • Posts: 1658
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #11 on: March 10, 2006, 11:05:08 PM »
Thanks everyone! And I did use tape to cover the fingers
and thumb holes. I will use dawn next time =)

Regards,
SuperTart Billy Graham
--------------------
Food is good for you!
Logged

purduepaul

  • Sr. Member
  • ****
  • Posts: 474
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #12 on: March 10, 2006, 11:10:40 PM »
What temperature wsa the water you put the bowling ball in.

Paul
--------------------
Famous Words said to me:"I may be a magician of carrying but I'm still beating you"  "GO TO YOUR HOME WHY DON'T YOU LIKE YOUR HOME"--said towards a solid 8 pin
Logged
"Oops, Looks like we are going to need another timmy."  -Dr Lizard, "Dinosaurs"

scotts33

  • Hero Member
  • *****
  • Posts: 8452
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #13 on: March 10, 2006, 11:35:59 PM »
quote:
 What temperature wsa the water you put the bowling ball in.

Paul


As hot as it will come out of the tap.  Not hot enough to ruin balls cover.
--------------------
Scott

Logged
Scott

BrunsMike

  • Hero Member
  • *****
  • Posts: 2785
Re: RESULTS: The ONE & Hot Water Treatment
« Reply #14 on: March 11, 2006, 12:06:17 AM »
I still need to do this with both my Vapor Zone and The One. The one is starting to lose its aggressive backend but still out hooks everything in my bag.
--------------------
Mike Zadler
NE Lake County IL
Sanctioned Highs:
775 Series/288 Game
Sanct. Ave. (2004/2005)194

Tweener by day, Stroker by night
Logged
Mike Zadler
Pages: [1] 2
« previous next »