win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Anger Prep  (Read 1568 times)

3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
Anger Prep
« on: March 22, 2009, 12:29:42 PM »
I have a Hammer Anger and am bowling in a medium oil house. It's drilled pin below bridge, obviously pretty powerful for a medium house as it burns up real quick and there is not much backend. Any surface tips that might allow this ball to perform better? thanks.
Logged

 

J_Mac

  • Hero Member
  • *****
  • Posts: 6778
Re: Anger Prep
« Reply #1 on: March 22, 2009, 08:48:16 PM »
PAP coordinates?

Try 4000 abralon, if that's still too early I'd hit it with fresh 1000 abralon and apply some polish on top of that surface.
Logged

J_w73

  • Hero Member
  • *****
  • Posts: 2540
Re: Anger Prep
« Reply #2 on: March 22, 2009, 09:58:28 PM »
My anger works great at all surface preps and a lot of conditions..
I took it down to 1000 to get a smoother roll out of it and was still use it on a medium shot with a little speed on it..
if yours is burning up and you want backend... take it to 4000 abralon.. that should do the trick
--------------------
16-17 mph,350 rpm,PAP 5 1/2 x 3/8up, HighGame 300 x 3, High Series 782
Book Average 215 / 205,PBA Xperience ave180

Logged
375 RPM, 17-18 MPH, 45+ DEG AXIS ROTATION, 17 DEG TILT

3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
Re: Anger Prep
« Reply #3 on: March 22, 2009, 10:06:55 PM »
quote:
My anger works great at all surface preps and a lot of conditions..
I took it down to 1000 to get a smoother roll out of it and was still use it on a medium shot with a little speed on it..
if yours is burning up and you want backend... take it to 4000 abralon.. that should do the trick
--------------------
16-17 mph,350 rpm,PAP 5 1/2 x 3/8up, HighGame 300 x 3, High Series 782
Book Average 215 / 205,PBA Xperience ave180



Hey thanks. I think i'm going tot take it to 4000, should i polish it or just keep it at 4000?
Logged

Ebonite BowlToWin

  • Full Member
  • ***
  • Posts: 167
Re: Anger Prep
« Reply #4 on: March 22, 2009, 10:10:39 PM »
I polished mine and it gets through the heads and still saves energy for the backend, my anger's still my benchmark ball
Logged

J_w73

  • Hero Member
  • *****
  • Posts: 2540
Re: Anger Prep
« Reply #5 on: March 22, 2009, 10:23:31 PM »
quote:
quote:
My anger works great at all surface preps and a lot of conditions..
I took it down to 1000 to get a smoother roll out of it and was still use it on a medium shot with a little speed on it..
if yours is burning up and you want backend... take it to 4000 abralon.. that should do the trick
--------------------
16-17 mph,350 rpm,PAP 5 1/2 x 3/8up, HighGame 300 x 3, High Series 782
Book Average 215 / 205,PBA Xperience ave180



Hey thanks. I think i'm going tot take it to 4000, should i polish it or just keep it at 4000?


I would leave the polish off of it to start out....not sure of your stats but at 4000 it should get down the lane on any condition.. it should have a bigger backend than you are getting now ..it might get pretty angular or jumpy on the backend though..

 I am super surprised how easily my anger gets down the lane on drier stuff.. but can still handle oil..
I dumped my cell because my anger killed it on just about every condition.
--------------------
16-17 mph,350 rpm,PAP 5 1/2 x 3/8up, HighGame 300 x 3, High Series 782
Book Average 215 / 205,PBA Xperience ave180



Edited on 3/22/2009 10:24 PM
Logged
375 RPM, 17-18 MPH, 45+ DEG AXIS ROTATION, 17 DEG TILT

3M Dust Remover

  • Full Member
  • ***
  • Posts: 206
Re: Anger Prep
« Reply #6 on: March 22, 2009, 10:26:33 PM »
i've noticed the anger does get down the lane fine, it's a matter of it not having any backend because i think it burns up fast on drier lanes.
Logged

J_w73

  • Hero Member
  • *****
  • Posts: 2540
Re: Anger Prep
« Reply #7 on: March 22, 2009, 10:30:10 PM »
quote:
i've noticed the anger does get down the lane fine, it's a matter of it not having any backend because i think it burns up fast on drier lanes.


I would agree.. at 1000 I didn't have a tremendous backend but the ball was burning up perfectly to hold the line straight up 12 and then turn into the pocket to kill the pins.. one thing I have seen is that my anger will carry heavy hits like no other ball I have..
the best thing about this 1000 surface was that on the slight reverse block that we were on.. the ball would hold the line tight.. but if I got it out you could see the ball cutting through the oil and get back to the pocket..
--------------------
16-17 mph,350 rpm,PAP 5 1/2 x 3/8up, HighGame 300 x 3, High Series 782
Book Average 215 / 205,PBA Xperience ave180

Logged
375 RPM, 17-18 MPH, 45+ DEG AXIS ROTATION, 17 DEG TILT
Pages: [1]
« previous next »