win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: No Mercy surface tweaking???  (Read 3248 times)

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
No Mercy surface tweaking???
« on: February 01, 2007, 06:49:54 AM »
Has anyone taken their No Mercy down to 600 or 800 grit, then hit it with Rough and Buff or any other polish? I was thinking of tinkering with it, to see if I got more overall hook, but still a good backend.
--------------------
Lane #1-Ebonite-Brunswick
Logged

 

MaineLefty

  • Full Member
  • ***
  • Posts: 119
Re: No Mercy surface tweaking???
« Reply #1 on: February 01, 2007, 02:56:08 PM »
I took mine down to 1000 Abaralon, and like it much better.  My first two sets since changing the cover were 705, 794.  It goes a little sooner and makes a nice arc, as compared to the skid-flip at 4000 grit!!
--------------------
*Freeing the world from the oppressive right handed regime, one tournament victory at a time!!!

IN THE BAG:
Hammer No Mercy
Columbia Wrath XP
Columbia U-Turn Particle Pearl

Personal Stats: http://members.bowl.com/FindAMember/memberView.aspx?mp=985&ms=391&s=2006-2007
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: No Mercy surface tweaking???
« Reply #2 on: February 01, 2007, 03:01:24 PM »
Mine was at 4000, but went too long for me on our shot. I went down to 1000 abralon, but I'm still looking for some pop on the backend, but hook at the same time.
--------------------
Lane #1-Ebonite-Brunswick
Logged

MaineLefty

  • Full Member
  • ***
  • Posts: 119
Re: No Mercy surface tweaking???
« Reply #3 on: February 01, 2007, 03:03:47 PM »
I might try sanding down to 400 or 600 then hitting it with Powerhouse Factory Finish.  It should give you the shine to the ball, but with enough bite for what you want it to do.  I have a U-Turn Particle Pearl at this finish and I really like it.  Good luck!!!
--------------------
*Freeing the world from the oppressive right handed regime, one tournament victory at a time!!!

IN THE BAG:
Hammer No Mercy
Columbia Wrath XP
Columbia U-Turn Particle Pearl

Personal Stats: http://members.bowl.com/FindAMember/memberView.aspx?mp=985&ms=391&s=2006-2007
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: No Mercy surface tweaking???
« Reply #4 on: February 01, 2007, 03:06:30 PM »
Does Powerhouse have grit like rough buff, or just a polish?
--------------------
Lane #1-Ebonite-Brunswick
Logged

MaineLefty

  • Full Member
  • ***
  • Posts: 119
Re: No Mercy surface tweaking???
« Reply #5 on: February 01, 2007, 03:11:01 PM »
They have a sandblaster product which is similar to rough-buff.
--------------------
*Freeing the world from the oppressive right handed regime, one tournament victory at a time!!!

IN THE BAG:
Hammer No Mercy
Columbia Wrath XP
Columbia U-Turn Particle Pearl

Personal Stats: http://members.bowl.com/FindAMember/memberView.aspx?mp=985&ms=391&s=2006-2007
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: No Mercy surface tweaking???
« Reply #6 on: February 01, 2007, 03:14:05 PM »
Thanks!

Anyone else experiment?
--------------------
Lane #1-Ebonite-Brunswick
Logged

DukeHarding

  • Hero Member
  • *****
  • Posts: 5855
Re: No Mercy surface tweaking???
« Reply #7 on: February 01, 2007, 04:17:14 PM »
I currently have my NM at 600 grit, with a coast of track Magic Shine on it.
It has great length and good bite on the backend.
I've tried 1000, 2000, 4000 with and without polish.
I did not like the reaction I was getting at those grits.
Ball works well on mediums w/some carrydown.

--------------------
Duke Harding


+++++++++++++++++++++++++++++++++++++++++++++++++++

Enjoy These Vintage Bowling Photos!
Logged

toomanytenpins

  • Hero Member
  • *****
  • Posts: 1452
Re: No Mercy surface tweaking???
« Reply #8 on: February 01, 2007, 05:57:46 PM »
i had mine taken to 2000 and it was basically the same as ob. Then i thru it in a polishing machine thinking i would use it for drier lanes,since i couldnt use it for anything else. Then i tried a different hand position and well with a softer speed and more hand i am finally starting to see some potential on fresh ths . I doubt that i could use it on anything heavier ,but it has moved up in my arsenal.
--------------------
my style, the art of bowling without bowling
Logged

chickwithballs

  • Jr. Member
  • **
  • Posts: 5
Re: No Mercy surface tweaking???
« Reply #9 on: February 02, 2007, 03:00:53 PM »
Is this a good ball for heavy oil? Im in need of a heavy oil ball and have been recommended to consider this one...
Logged

Rc Charger

  • Sr. Member
  • ****
  • Posts: 379
Re: No Mercy surface tweaking???
« Reply #10 on: February 03, 2007, 08:07:56 AM »
I didn't like my NM either at 4000 so took it to 1000 I felt it was a little better.  I have recently taken it down to 500 abralon and hopefully thinking that it will give a me a reaction I'm looking for.  I wouldn't polish this ball unless it's hooking at your feet because it picks up a easy shine after +20 shot's. IMHO this ball isn't s heavy oil ball there's better equipment out there for that condition.
Logged

jls

  • Hero Member
  • *****
  • Posts: 18398
Re: No Mercy surface tweaking???
« Reply #11 on: February 03, 2007, 09:11:04 AM »
quote:
I took mine down to 1000 Abaralon, and like it much better.  My first two sets since changing the cover were 705, 794.  It goes a little sooner and makes a nice arc, as compared to the skid-flip at 4000 grit!!
--------------------
*Freeing the world from the oppressive right handed regime, one tournament victory at a time!!!

IN THE BAG:
Hammer No Mercy
Columbia Wrath XP
Columbia U-Turn Particle Pearl

Personal Stats: http://members.bowl.com/FindAMember/memberView.aspx?mp=985&ms=391&s=2006-2007



i agree,  we have taken the cover down to a 1000 abralon pad for many customer's.  the ball reacts great in oil,  but with a more controlled backend.
and some feel they can still get to the 3rd game using the ball.


--------------------
jls31316
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: No Mercy surface tweaking???
« Reply #12 on: February 04, 2007, 05:58:15 AM »
Results:

600 grit wetsand + rough and buff= 269 off the spinner! Got what I was wanting, exactly. The ball still has some length, but has a great drive and pop on the backend. Not a big hooker by any means, unless it's a little drier outside, but perfect for what I was after.
--------------------
Lane #1-Ebonite-Brunswick
Logged

chickwithballs

  • Jr. Member
  • **
  • Posts: 5
Re: No Mercy surface tweaking???
« Reply #13 on: February 04, 2007, 10:44:55 PM »
so Rc Charger, you wouldnt reccomend this for heavy oil? What would you recommend? Im in desperate need of a heavy oil ball for tournaments(definitely wont be used in the houses I bowl in for league, way too dry) so any suggestions would be much appreciated!
Logged

Fatboy8

  • Hero Member
  • *****
  • Posts: 3265
Re: No Mercy surface tweaking???
« Reply #14 on: February 05, 2007, 05:29:52 AM »
Hawgzilla, Road Hawg for heavy.
--------------------
Lane #1-Ebonite-Brunswick
Logged
Pages: [1] 2
« previous next »