win a ball from Bowling.com

Author Topic: polishing  (Read 2411 times)

fishnic

  • Sr. Member
  • ****
  • Posts: 450
polishing
« on: July 01, 2004, 06:18:02 AM »
i am just wondering if you would polish the
big blue would it be the same as the big blue pearl,
i would think so, just making sure.

 

jkiser01

  • Hero Member
  • *****
  • Posts: 7124
Re: polishing
« Reply #1 on: July 01, 2004, 09:49:09 PM »
No its not, unless you put an awful lot of hand in the ball.. I polished mine and hated it..Ypu can try it and always dull it back if you don't like it..

I have had 2 big blues drilled differently and I sold them both, just not the ball for me..
--------------------
If they only made a ball that would carry that d*mn 10 pin..

jkiser01
Radical Bowling Technologies ...Its more than just an Attitude!

smash9

  • Sr. Member
  • ****
  • Posts: 396
Re: polishing
« Reply #2 on: July 01, 2004, 10:44:40 PM »
Yeah, but one of the big blues he sold went to me --- It IS the ball for me ---Thanks, JIM.....On a more serious note, I had another BIG BLUE that had a couple of drillings in it.. first I tried it w/box finish, then I polished it as an experiment--- I went back to the box finish --- I'm not saying that you can't polish a big blue --- saw a post awhile back where a guy was talking about seeing a guy throw a polished BB with a lot of success -- just wasn't what I was looking for in terms of ball reaction.  I also have a BBP -- totally different reaction than the BB shined up.

jkiser01

  • Hero Member
  • *****
  • Posts: 7124
Re: polishing
« Reply #3 on: July 01, 2004, 10:53:31 PM »
smash9, glad you like it.. Some balls are just not for everyone I guess.. I really wanted the big blue to work for me, just never really found a place on the lane where I could get the ball to carry consistantly.. That post awhile back about the guy using a polished big blue with success said that the guy had tons of hand in the ball, thats no doubt why it worked for him.. Guys like that can hook a white dot 15-20 boards!! LOL..
--------------------
If they only made a ball that would carry that d*mn 10 pin..

jkiser01



Edited on 7/1/2004 10:50 PM
Radical Bowling Technologies ...Its more than just an Attitude!

fishnic

  • Sr. Member
  • ****
  • Posts: 450
Re: polishing
« Reply #4 on: July 01, 2004, 11:04:04 PM »
I love my big blue, it’s not the biggest hooking premium ball, but I love how
Hard it hits with my slower ball speeds. But my friend hates it and he was just
Going to try polishing it before he sells it to see if he will like it more.

 
jkiser01, what did the ball do that made you hate it.

Strider

  • Hero Member
  • *****
  • Posts: 6757
Re: polishing
« Reply #5 on: July 01, 2004, 11:05:34 PM »
Polishing a solid will get you close, but never the same as a pearl.  Pearls have an additive (commonly mica) that will skate through the oil and react to the dry more than a solid.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive

jkiser01

  • Hero Member
  • *****
  • Posts: 7124
Re: polishing
« Reply #6 on: July 01, 2004, 11:10:43 PM »
fishnic,

I didn't hate it, just didn't do what I wanted it to do.. hook consistantly. I alos try alot of different balls and if one doesn't work for me, I sell it pretty quick. Smash9 can you tell the condition of the 2nd big blue he bought from me, it was like new..
--------------------
If they only made a ball that would carry that d*mn 10 pin..

jkiser01
Radical Bowling Technologies ...Its more than just an Attitude!

TOON

  • Hero Member
  • *****
  • Posts: 630
Re: polishing
« Reply #7 on: July 02, 2004, 02:25:53 AM »
I've got mine sanded with an abrolon pab at 1000 grit and love it.  At about 30 - 35 feet, it makes a hard arc to the pocket, just like the old blue Hammer did 17-20 years ago.  I really like the smooth arc as it is forgiving on a high hit, meaning it does not leave many big through the nose splits.  Hits hard enough to carry the 4 pins!!
--------------------
TOON
TOON
Proud to be a Hammerhead!

fishnic

  • Sr. Member
  • ****
  • Posts: 450
Re: polishing
« Reply #8 on: July 02, 2004, 02:09:22 PM »
toon,


I have mine sanded at 1000 too, i did not think it would
make that much difference but it actully did, it hooked
a little later and it hit harder.

anotherwindup

  • Hero Member
  • *****
  • Posts: 740
Re: polishing
« Reply #9 on: July 02, 2004, 02:44:39 PM »
I just polished my Big Blue recently with Powerhouse Factory Finish.   I first sanded it to 2000 with an abralon pad and then polished it, hitting all 4 sides.

This ball is a truck, but is nothing like my 2 BBP's.
--------------------

Jason Jenkins
"Nothing HITS like a Hammer"

Strider

  • Hero Member
  • *****
  • Posts: 6757
Re: polishing
« Reply #10 on: July 02, 2004, 08:03:32 PM »
quote:
they have completely different coverstocks. The big blue pearl is NOT a pearlized version of that same coverstock.


I didn't know that.  Thanks for the clarification.  My earlier post still stands for the difference between a solid and an otherwise identical pearl. How do you know the covers are different?  I don't see much information on Hammer's site.  The pearl has ER-20, but nothing is listed for the solid.
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive