Ball NPS Score: Not Available
Designed to increase length while retaining energy longer, increasing the rev rate at the breakpoint, producing a mind boggling entry angle, resulting in amazing pin carry and scoring potential on drier lane conditions.  With this newest addition to the MoRich line, bowler's world wide will soon be ravaging the competition!  Check back for more information to be released shortly!

I have two drilled up right now.  I drilled my first one up 3 1/2" x 5 1/4" with the pin 1 1/2" above the midline (just under my ring finger) and I am keeping it at 2000 wet sand.  This ball is very clean through the heads and gets around corner really well.  I have been getting left with my feet and slow hooking it a little and I have shot 780, 762, and 705.  Obviously I enjoy the ball.  The second one I drilled was 2 1/2" x 6" with the pin 1/2" above the midline.  I am keeping this one shiny and I am using on 3 very specific patterns.  If I need to play up the boards, on overblocked lanes, and when the lanes just turn to dirt.  I have only thrown one series with this ball and shot 708 with a 190 game.  That series was shot on an overblock and I just moved right and bounced the dry.  I have had mine for almost 3 weeks and I really love them.
--------------------
www.morichbowling.com

I drilled this 15lb ball using the sharp backend for high track player.  I have used the ball on heavy, medium, and dry oil patterns.  The ball will work well on heavy and medium oil conditions with the proper coverstock preparation.  The ball is too strong for dry lane conditions unless your ball speed is around 25 mph.  One thing I noticed about the Ravage is that it carries well even if I do not put a lot of hand in the ball.  My only dislike about the Ravage is a shot through the 1 pin (bowler's error) almost always results in the 4-6-7-10 split.  Best series with this ball 247+215+242=704. Great ball Mo!!!
--------------------
You will not see me on the PBA Tour, but I love the game!!!

This ball Flies!

I got this ball drilled

http://www.morichbowling.com/TotalAnnihilation/MedSharp.htm

and it glides beautifully down the lane and at the last moment it rolls back smooth and hits the pins with a destructive sound to back it up.  I just got it recently and have already broken 730.  I have many other balls for comparison like: Vicious Particle, Vicious Strike, Inferno and the Dry Heat.  This ball is tied with my VP by hitting the pins hard and leaving little ten pins.  I've only left 4 ten pins through out the 10 games I've thrown with it so far.  I am hoping to get my second 300 with this ball.  And what I've seen it can do I can tell it won't be very long now.  Those pins stand no chance when met with the Ravage!

I was recently looking for a new ball to go with my raging inferno. I have, in the past used mostly brunswick balls. I was looking to purchase an intense inferno to play an outside the track down and in shot. The pro shop owner was really pushing the morich line due to the weight block design. he said that I would increase my carry with a morich ball. we finally agreed on a ravage. So far I'm totally unimpressed. This ball gets through the heads nicely but the backend reaction is much less than advertised. Carry is allright but after three weeks I haven't finished a three game set with ball. I'm going to sand this ball up in hopes  of being able to use it for something other than a 200 dollar boat anchor.

Ball specs: 15lb 5 oz. 2.5 oz tw, 3" pin.
After drill, the pin was above the bridge and the mb left of thumb.

I have only used this ball for 3 games but I am going to review because I am not using the ball anymore. It doesn't react the way I thought it would. It is alot stronger than I thought it would be.

With the drill I put on the ball, I expected to get a long and controllable reaction out of it, WRONG!! The pin placement increases track flare causing the ball to read the lane earlier. The backend is smooth and controllable but the ball revs up way too early. Not a light oil ball for me at all. It is more of a medium ball. I would have altered the cover or even tried a different drill but I found a ball that gives me the reaction I was trying to achieve. I figured I would cut my losses and get rid of this one while it is still like new.

I am not saying this is a bad ball, just make sure you understand the dynamics of a core before drilling. I thought the drill would give me a certain look and it didn't. Its my fault for not researching the ball thoroughly before drilling. Oh well, you live and learn.
--------------------
I just close my eyes and throw the ball

A FRIEND OF MINE SENT ME THIS BALL A MONTH OR SO AGO AND I AM COMPLETELY IMPRESSED WITH THIS BALL. CANT SEEM TO KEEP IT OUT OF MY HANDS. I HAVE SEVERAL OTHERS BUT THIS MY 1ST MORICH. HITS HARD REVS UP REALLY WELL AND EASY TO WATCH HOW IT READS THE LANES DUE TO THE COLORS. BY THE WAY I HAVE IT STACKED LEVERAGE
DRILL. NOT GOOD WHEN HEADS ARE BURNT BUT AFTER THROWING IT A WHILE I HAVE LEARNED TO BANK IT FROM INSIDE 3RD ARROW CHASING OIL AND TURNS REAL WELL AS LONG AS YOU HAVE AN OIL LINE. I AM AVERAGING 222 IN LEAGUE AND PROBABLY BETTER THAN 230 WITH THIS BALL. SEVERAL 700+S. HAVENT SHOT 300 WITH THIS ONE YET BUT HAD THE FRONT 10 IN ASSOCIATION TOURNAMENT WITH IT AND SHOT SCRATCH 2106 IN ALL EVENTS WITH IT. I WILL SHOOT MY FIRST 800 WITH THIS BALL. SHOT 773 BUT LEFT SOME SOLID 9 PINS. THANKS TO MY BUDDY DANE FOR SENDING THIS TO ME AND THANKS TO MO PINNEL FOR YOUR PRODUCT. LOOKING FORWARD TO TRYING ANOTHER MORICH SOON.

Ball is layed out with the pin 2 1/2" from axis, 1 3/4" above the ML, with the MB 6 3/4" from axis just left and under the thumb.  There is a 1" weight hole, about 2 1/2" deep, 4"from my grip center on the ML.  A control drilling.

Initially, this ball was anything but control for me.  It was very sharp off the break, and had an outrageous backend reaction.  I was about half and half on if I liked the ball or not, but I was shooting lights out scores in 1 of my leagues with it.  That's the only reason I stuck wit it.  My first tweak was to knock the factory shine off the ball with grey pad.  This helped, but the ball was still more than what I was looking for.  I let the ball track in, and went about 25-30 games on it without cleaning it.  The ball really started to settle in from there, and I re-shined the ball with magic shine to a high gloss.  After the polish the ball went straight, a little too straight for what I was looking for, but nothing a light scuff with a grey pad couldn't help.  After all this, the ball was finally where I wanted it.

This is my go-to benchmark ball.  I can use it on 90% of conditions I use, and can never seem to put it down.  Ball responds well to hand changes, but it seems to work best for me when i'm getting up the back a little more cutting the side roll down, and getting a little tilt on it.  This ball carries the world when I can get my hand to that position.  It clears the heads, really reads the mids, and keeps revving in the back until it hits about 55 feet.  At this point, it sets nice for me right in front of the hole, and rips racks apart.  Hit and carry is amazing, just like any other MoRich ball I have.  I really can't say enough about this ball, it's just that good.

Overall, the best ball in my bag, and could be a benchmark in anybodies bag.  It hooks more than MoRich advertsied, but give it time and keep working on it, and it will be what you want.  This ball Is awesome to compliment the S&A, which should be an awesome trio when I drill the Sahara.  A real winner from MoRich here.
--------------------
*Erie Community College bowling*

Buffalo bowlers are the best all around in the country.

MoRich 4ever!!!!  If you don't have one, try one.  You won't be disappointed!!!