win a ball from Bowling.com

Author Topic: Triple X-Factor  (Read 30087 times)

admin

  • Hero Member
  • *****
  • Posts: 1241
Triple X-Factor
« on: December 31, 1969, 06:00:00 PM »
The new super aggressive MONSOON™ Pearl coverstock performs better in today's bowling environment. Matching this powerful coverstock to the new inverted RAD3 Triple Disk Technology weight block produces a massive backend flip for extreme entry angle. The Triple X Factor — sit back, relax, and HANG ON!

TRIPLE X FACTORâ„¢  Technical Specifications

Coverstock MONSOONâ„¢ Pearl Reactive
Weight Block Inverted RAD3â„¢ Triple Disk Technology
Ball Color Violet, Cherry, Gold Pearl
Ball Finish 1500-grit Polish
Radius of Gyration 2.52 (Low)
Differential .055 (High)
Durometer 73-75 Rex D-scale
Flare Potential 6" (High)
Fragrance Black Cherry
Weights 10 - 16 lbs.



 

Mike Austin

  • Hero Member
  • *****
  • Posts: 2057
Re: Triple X-Factor
« Reply #16 on: March 02, 2004, 02:12:35 AM »
My Triple X started with 1.78 top weight and the pin about 3 3/4 out from the CG.

I put the pin over my fingers, slightly left of my span line, which gives me a 5 inch pin from PAP distance.  The RAD is out to the right, about 1 1/2 right of my thumb hole, which is about a 75 degree position.  

I had to use a small hole to get the ball to ABC legal, that hole is 6" over and 2" down from the center of my span.  Used a 3/4 inch bit and went down about 1 1/2".

I wanted this ball to be very long, good length, even when the lanes start breaking down.  (Reason for the 5" pin)  I wanted a firm back end, not super snappy, but strong.  With my medium ball speed, I can usually get the ball to turn the corner.  (Reason for the strong mass bias and small hole)

This ball does just what I wanted to see.  I used this ball on wood lanes, fresh oil, but the shot is kinda medium/dry.  Pretty much a THS, just a little on the dry side.  I got great length, ball was very clean through the front.  When I changed hand positions, the XXX was very responsive.  I could square up on the oil line, be soft with my hand, more up the back and firm with my speed and the ball would go verrrrry long, and smooth back end.  No over reaction, the ball under reacted if anything.

I could also move my target closer to me and try to get a little more on the ball, more side turn (my natural release) and the ball went nicely down the lane and turned harder on the back end.

Carry was very good, most any single pins could be attributed to me not making a great shot.  XXX hit pretty hard, finishing through the pins, without much deflection at all.  727 first 3 games that counted is okay with me.

I think the XXX has that "lopey" motion like the Fear Factor, but farther down the lane, and more back end.  Less overall hook than the Fear Factor.  XXX is longer than the original X Factor, and for me finishes much better.  I had a hard time getting the original X Factor to save enough energy to finish on the back end.  XXX has almost as much length as the Power Charge Pearl, but more back end.

I think the XXX will be a more versatile ball than the X Factor.  X Factor seemed one dimensional.  I think you will be able to do more with this ball than most of Storm's recent high end releases.  I like the way this ball rolls, and like what I have seen of it in the hands of other people too.

This ball will be used on medium to some dry by most players.  High speed guys will use this on dry.  Only very slow ball speed players will want to use this ball on oil, as there are really better choices.  This could be a bench mark ball for some people, specially with a little scotch brite to the surface for heavier oil.  Storm probably has the best pearl reactive cover stocks on the market today, if you use this ball for what it was meant for, I think you will really like it.

(Bring on Reno, Think this ball could be nasty at ABC Nationals!!!!  )

--------------------
Mike Austin
Mike Austin's Precision Pro Shop
Houston, TX
strikes4days@sbcglobal.net
Storm Pro Shop Staff Member
Vise Grips Staff Member


Onward through the Storm!!!!

Check out our web site - www.BirdDogBowling.com
Mike Austin's Bowling Dynamix Pro Shops
Inside Emerald Bowl
Inside Tomball Bowl
Track Pro Staff Member
Vise Grips Staff Member

recognize_talent

  • Full Member
  • ***
  • Posts: 208
Re: Triple X-Factor
« Reply #17 on: March 02, 2004, 04:50:15 PM »
buy it crazy if you dont, and i dont even like storm 'cept the smells.
--------------------
"Strikes show them you know the game. Spares show them you can play the game." A wise man knows when he is beat, it's time you RECOGNIZE Talent!!!

JayB2

  • Newbie
  • *
  • Posts: 1
Re: Triple X-Factor
« Reply #18 on: March 03, 2004, 12:36:40 AM »
Just drilled this ball Basic 1:30 lable drill rad in the track. This ball got thought the heads very clean and had a good move to the pocket. Not to snappy just a smooth roll thought the pins. I will post more after using it more. It seems to be another winner by storm.

jayelvis13

  • Newbie
  • *
  • Posts: 2
Re: Triple X-Factor
« Reply #19 on: March 06, 2004, 02:51:13 AM »
Man what a ball. I have had it for 2 weeks and I only bowl once a week. I am a low 200 average bowler and the 1st week I shot 701 (1st 7- solid 10)
When I decided to bowl a sweeper, I shot 277 and made the semifinals (I was able to move deep inside and still have carry power)
Last night I shoot 300,245,207 = 752 with 3 solid 9 pins on decent oil !!

I have never used Storm equipment until now. After finding out my pitch was wrong on old equipment, I extended it a 1/2 inch and wow I am off the charts !!

Thanks XXX !!!!!!!!!!!!!!!!!!!!!!

Stan

  • Hero Member
  • *****
  • Posts: 667
Re: Triple X-Factor
« Reply #20 on: March 09, 2004, 12:01:25 AM »
My question is for you guys that have over 30 games on the ball, is the cover holding up ???  Storm balls seem to be great out of the box (like most others)and then quickly die.  It happened to my X-Factor and my Duece.  I know every ball tames down after a few games but these balls seem to tame down a lot more. I guess, Storm equipment has so much backend that it is more noticeable on their equipment.

Thanks


Quantum300

  • Jr. Member
  • **
  • Posts: 22
Re: Triple X-Factor
« Reply #21 on: March 09, 2004, 12:02:43 AM »
Let me start off by saying this is my first review.  The triple x is my second storm ball i had gotten the razor wire first and i am waiting on a 3rd storm ball.  I had thuis ball drilled on 3/7 and i threw it on 3/8 on a sprt shot condition.  The shot is basically oil no more than 2 units different across the lane as is required by the ABC for a sport shot sanction.  Tonight i was playing the ball from 20 out to 12 and it was awesome.  If i went a hair wide it came back with good power and left a weak ten pin, if i tugged it it did not drastically over react.  This ball is very predictable i have a high rev rate and gave my ball driller DOUG STERNER the task of making it playable for me.  Doug let me tell you great job my man this ball is awesome.  This ball i feel can be made playable for anyone as long as your ball driller can match a drilling for you.
--------------------
Quantum300

smittybilt30

  • Newbie
  • *
  • Posts: 1
Re: Triple X-Factor
« Reply #22 on: March 10, 2004, 01:12:27 PM »
Let me start off by saying this is my first ball from storm and my first new ball in 10 years.  I have always bowled with the superbeast ball from columbia but it has finally died.  I had my ball drilled slightly left of the pin and boy does it hook like a moster.  The deck is always cleared and it recovers from almost anywhere on the lane as if it were on auto-pilot.  I love this ball.  I am a low 190 average bowler and bowled a 298, 243, 242 in my first three games with this ball.

laxbowler02

  • Jr. Member
  • **
  • Posts: 9
Re: Triple X-Factor
« Reply #23 on: March 16, 2004, 01:29:03 PM »
I got this ball about a week ago. I didn't really have a ball for heavier oil so i needed to get one for tournaments and such.  I was reading up on the fear factor and didn't like the fact that it burnt up so quick.  I read up on "trifecta" and decided to try her out.  I used layout #6....to make the ball roll and hook earlier...i went and threw 6 games with it right after i got it...WOW!!  This thing hits like a semi...if it hits the pocket...it won't leave anything...i realized that this was a manufacturers finish and thought it would tame a little...i now have about 25 games on this beast and she still flies as much as when i pulled her out of the box...great ball!!  I shot 704 last night with her.  Only good things about this ball so far.  9.5 out of 10 so far!!!
--------------------
Get caught up in the Storm.  STORM'S #!

jayelvis13

  • Newbie
  • *
  • Posts: 2
Re: Triple X-Factor
« Reply #24 on: March 20, 2004, 03:58:53 AM »
A 4th week with the XXX and I have shot 701,752(300), 694(266) and 706(289).
Need I say more ??????

Not bad for a guy who tosses 3 games a week. Could it be the ball ?? I would say ummmmm yep !!!!!!!!!!!!!

Invest you wont be sorry................

Jayelvis13

BuddiesProShopcom-Chris

  • Full Member
  • ***
  • Posts: 200
Re: Triple X-Factor
« Reply #25 on: March 23, 2004, 12:23:51 AM »
Well it has been a long time since I've posted any reviews, but I thought I would do some and start with this one.

I drilled one of these when they sent me the staff balls. Layed it out with the pin 4 3/4 from my PAP and the RAD on my leverage line. If I bowled on a shot with heavier oil in the heads and fresh backend the ball was great. But once the fronts burned up the ball would seem to lose some pop. So I was a little skeptical. I have not had the greatest success with the XFactor line. For me the mid price balls Storm makes work better. So with this in mind I called Steve Klompken at Storm. I explained my dilema and what I thought I needed to try. He recommended putting the pin much farther from my PAP. So I drilled another one on Friday. I put the pin 6 1/4 from my PAP and the RAD on my leverage line. I personally didn't think this would work because generally when I put pins past 5 1/4 from my PAP the ball pukes. I practiced on a 42 foot sport pattern with a good amount of oil. I was amazed at my ball motion now. The ball cleared the front and really revved up down the lane. So I figured well this is because the lane is fresh. But I bowled about 6 games and even as the lane transitioned the ball still remained strong and never lost anything. I then tried the ball at a beat up wood center in a tourney and the ball still cleared the front and revved up down the lane. With this layout I still get 6 plus inches of flare. AMAZING!

In closing what Steve explained to me is that looking at differential on a ball is key. By talking, about we came to realize that I like mid to lower diff balls. The XFactor line is all high diff. Thus the balls are very strong. So by putting the pin so much farther from my axis it allows the ball to store more energy and not burn up as fast.

If you are a straighter player I would recommend staying with the stronger layouts, but if you have a higher rev rate put the pin farther from your PAP and you will love this ball.

dsundblade

  • Newbie
  • *
  • Posts: 1
Re: Triple X-Factor
« Reply #26 on: March 29, 2004, 01:23:11 AM »
This ball has a large pin-out (4 3/4"), thus the choices for layout were limited. With that said, I chose a very aggressive layout to allow the ball to go long with a strong flip/arc in the backend.

The Pin is placed about 1 ¾” above my bridge, which relates to a distance of 6" from my PAP.

The CG is placed directly at the center of my span.

The MB is located about 2 ½” right of my thumbhole. I had hoped to place the MB at the center of my VAL and track (the strong flip position), but due to the asymmetrical design of the core (coupled with the very large pin-out) the best I could do was an MB which was located about half-way between my VAL and Strong position.

The ball did not require a balance hole. This layout naturally provided about ½ ounce of finger weight and ¼ ounce of negative weight.

This layout was as near perfect as I could have hoped for. The ball moves cleanly through the heads and generates a strong flip/arc as it reads the dry backend. With the MB located a little closer to my VAL the ball does not overreact and drive through the headpin, but rather it just begins to straighten out as it CRASHES through the pins!!!

This is a very aggressive ball that has finally allowed me (a stroker) to play inside of the 12-13 board. With this ball I usually begin playing the 12-13 out to the 6-8 board for the first few frames, then as a track develops, I can take her a bit further inside to a 14-16 out to the 7-8 board and watch the fireworks as it comes screaming back into the pocket!!!

I have several friends who are Crankers, and they are absolutely in love with this ball. They can take it Way inside and play a line from the 25 out to the 5 board and it just Crushes everything !!!!!!!!!

I definitely would recommend this ball to everyone, although a slightly less aggressive layout would probably be needed by anyone with high revs (cranker), that is unless you love to watch your ball perform tricks!!!

Ryan Peebles

  • Jr. Member
  • **
  • Posts: 57
Re: Triple X-Factor
« Reply #27 on: March 30, 2004, 09:07:11 PM »
My first EVER X-Factor ball!  I bought it off the used ball rack (yes, I said USED) at my pro shop:  a fifteen-and-a-half-pounder in near mint condition with less than five games of mileage (guess the ball was not to the previous owner's liking!).  The drill span and pitches were close enough, so replugging was unnecessary!  The existing holes were drilled out for grips and a thumb slug and... voila:  a premium Storm bowling ball for FAR less than half price!

On that note, on to the review!

My Storm Triple X-Factor was drilled leverage (4" X 1 1/2", pin under and just right of ring finger, CG close to VAL) with RAD in strong position, but closer to the VAL.  The layout is similar to my Super Charge.

In my very first game with the XXX (practice, of course), I rolled 256 en route to a 734 series.  This ball reminds me of the good ol' Zone days with its strong early roll, but with greater length, snap, hit, pin carry, and forgiveness.  Debuted it in league play this past Saturday and rolled a strong 737 series (227-253-257).

This ball leaves very few corners, because the scouts really go flying and dance across the deck, especially on the light hits!  The people at Storm really do have their fingers on the pulse of the bowling community, and their brilliance lies in those eight-and-a-half-inch-diameter spheres.  I thank Storm for making some real top-notch equipment that has tremendously helped my game in 2004.  The XXX is a continuation of their great work!
--------------------
Behind the approaching front, the perfect Storm is about to be unleashed...
Ryan Peebles
Area Staff Member
Lane Masters/Lord Field/SWAG
www.CaliforniaBowlingLLC.com

GET YOUR SWAG ON!

khescock

  • Jr. Member
  • **
  • Posts: 14
Re: Triple X-Factor
« Reply #28 on: April 05, 2004, 03:25:19 PM »
This past weekend I was a tournament that was on heavy heavy oil. The first day was throwing a deuce up the one board and couldn't get back to the pocket. For the next day after making the cut, I need something aggressive for the next day. He had a plugged Triple X that a full roller didn't like. He drilled it with the pin under the ring finger and the CG above center line and left of my PAP. The RAD was about two inches off my PAL line. I had to resurface the ball and I left it at 400 grit sanded. The next day, the ball picked up in the backend alittle more better then the Deuce. The ball was light for me, but still had a good reaction throwing the ball in the soup, I had won most of my matches with it.
That was my first Triple X, but I've been watching them, and they really aggressive when shined and they react really no matter what speed you throw. If you looking for a good, aggressive ball, the Triple X is the ball for you.

Another great ball from the bowler's company.

bowler851

  • Sr. Member
  • ****
  • Posts: 331
Re: Triple X-Factor
« Reply #29 on: April 11, 2004, 03:15:19 AM »
FOR THE PRICE TAG ALONE LEAVE THIS BALL ALONE MUCH BETTER STORM EQUIPMENT AT A MUCH LOWER PRICE TAG.

Splitz

  • Sr. Member
  • ****
  • Posts: 306
Re: Triple X-Factor
« Reply #30 on: April 18, 2004, 12:34:14 PM »
I've been using the Triple X-Factor for about a month now.  I used it on guardian and synthetic lanes with fresh house patterns and after shifts had bowled.  

I throw right handed, medium speed, with medium revs and a lower track.  I had hoped this ball would replace my Ebonite Warrior, a ball that had worked very well for me, especially when new.  The Triple X-Factor was drilled with the pin about 3.5 inches away from the PAP and the pin is over the fingers.  The RAD is about an inch an a half to the right of my thumb hole.

I noticed this ball really reads oil in the box condition.  It will not finish hard enough for me if I cannot get it to some dry boards sometime before it hits the pins.  Heavier carrydown or toasted heads really makes the ball hard to score with even if you find a way to get it to the pocket with decent entry angle.  On the other side, this ball is very easy to score with when the lanes have more of a fresh oil look to them.  It will play inside, down the track and even way outside with great carry.  Overall, I'd say this ball is very good but to make it work to its potential you need good speed control or a slightly forgiving oil pattern because it is very agressive when it hooks.  Little changes in speed or revs give great big changes at the pins.

Although they were drilled similar and had similar finishes, the Warrior was a little more forgiving.  The 3X wants to go a little longer and snap a little harder which is great for someone with a consistant shot, but if you have problems with consistantly repeating your shot, I think the 3X won't do you much good in the long run.