win a ball from Bowling.com

Author Topic: Gravity Shift cover  (Read 1354 times)

BrianCRX90

  • Hero Member
  • *****
  • Posts: 2486
Gravity Shift cover
« on: July 05, 2008, 08:03:48 AM »
This has been my benchmark ball only have owned it for a few months but a couple of weeks ago I noticed in practice before league and warmups the ball was reacting horrible on a simplistic house shot. Out to 10 hit horrible. Out to 5 never recovered or would hook way too much. I extracted the oil out of the ball a month ago when it really didn't need to.
I feel that the comination of the mild wear and the factory polish perhaps needing a surface adjustment. So I have the one and only Abarlon pad at 1000 grit. Since I bought this I stopped wetsanding balls. This works great since I don't have a spinner I can place it in my sink and works great. Then I hand polished it with some Brunswick polish for a decent but not totally glossy shine. I'm hoping this will take care of it.


 

n00dlejester

  • Hero Member
  • *****
  • Posts: 3354
  • The Dude Abides
Re: Gravity Shift cover
« Reply #1 on: July 06, 2008, 12:16:06 AM »
I've had a somewhat similar problem with my Gravity Shift.  After the factory polish sort of went away, my backend hasn't been anything like it used to be.  I've tried a few different surfaces, but I think each time I've over polished it (me or the pro-shop guy has).  Right now I have it at 2000 Abralon with some Storm X-Tra Shine on it.  It's alright, but nothing like what it used to be.  I think I'm going to try a lower grit, 1000 Abralon, and some polish.  Let me know how it goes Brian, I'm very interested!

Thanks
--------------------
Obviously, you aren't a golfer.
Check out this blog
"This is not 'Nam. This is bowling. There are rules."

Bowler19

  • Sr. Member
  • ****
  • Posts: 433
Re: Gravity Shift cover
« Reply #2 on: July 06, 2008, 01:03:38 AM »
Fortunately Mine hasn't had that happen yet. I did try it at 2000 abralon and it was very strong. I then polished over that with Beans secret sauce and the backend is still strong
--------------------
Jason K
But be not afraid of greatness: some are born great, some achieve greatness, and some have greatness thrust upon them.-W. Shakespear

Jason @Juniors Pro-Shops
LaSalle, Quebec
Located inside Pont Mercier Lanes.
Edmonton, Alberta.
Located inside Ed's Rec Room.(WEST ED MALL)
King Of Roto-Grip In Canada.

www.juniorsproshop.com(coming soon)

tuckinfenpins

  • Jr. Member
  • **
  • Posts: 39
Re: Gravity Shift cover
« Reply #3 on: July 09, 2008, 04:19:00 PM »
anyone try snake oil on the gravity shift? if so what was the outcome
--------------------
its all fun and games till pins get broke

knobs1

  • Full Member
  • ***
  • Posts: 150
Re: Gravity Shift cover
« Reply #4 on: July 09, 2008, 04:29:05 PM »
have pro shop bake oil out take it to 1500 and put on alittle reacta shine use a spray of water while putting on reacta shine buff with paper towel after storm balls are hard to get back to factory finish
--------------------
Everyone is always chasing the EYE of the STORM

backswing_aplenty

  • Sr. Member
  • ****
  • Posts: 299
Re: Gravity Shift cover
« Reply #5 on: July 09, 2008, 06:41:15 PM »
I like Storm balls at 1000 Abralon with Power House Factory Finish on it.  Seems to give back that tackiness from the factory surfaces.

I do this with the pearls labeled as 1500 and polish.  I find Reacta Shine is similar when at 1000 Abralon as well just not as tacky.  I use Xtra Shine on my drier lane stuff with 2000 or 4000 underneath, gives the length with milder, arcier backend.


*backswing
--------------------
*...Got the 5 out clean!

To prove I'm real 270-2931 http://members.bowl.com/FindAMember/memberView.aspx?mp=270&ms=2931&s=2005-2006

Blistershurt

  • Jr. Member
  • **
  • Posts: 49
Re: Gravity Shift cover
« Reply #6 on: July 09, 2008, 06:52:25 PM »
I say give it a hot water bath and get the oil out of it, then refinish it to factory finish or whatever has been working for you
--------------------
Weapons
Anger, Cell, Spare ball (for the pesky one left standing), Scout (rico!!), and No Mercy (on the way)

High Game-300
High Series-767

Gazoo

  • Hero Member
  • *****
  • Posts: 1872
Re: Gravity Shift cover
« Reply #7 on: July 09, 2008, 07:00:27 PM »
320/1500 grit compound (Storm step 2) factory OOB