Author Topic: New Street Rods (Read 3489 times)

uwecbowler · « **on:** April 07, 2008, 04:34:03 AM »

Hey All,

Just wanted to get some first impressions on the new Street Rods and perhaps a layout suggestion.

I need a ball for fried lanes and I was wondering if I drilled one of the Street Rods at a 5" (or more) Pin to PAP, which one would be better. My first thought was the Pearl but would that be too jumpy if there was some friction in the heads?

What kind of reaction should I expect if both balls were drilled 5" (or more) Pin to PAP OOB?

FYI: my PAP is 4 3/4"

Edited on 4/7/2008 12:34 PM

n00dlejester · « **Reply #1 on:** April 07, 2008, 12:39:51 PM »

For fried lanes I think you may be looking at the wrong ball. I have a Neptune, and sometimes even that's too much. For fried lanes go plastic.

uwecbowler · « **Reply #2 on:** April 07, 2008, 12:41:24 PM »

Okay, not really fried lanes but something to use later in tournaments when everything I currently own is over hooking.

Dan Belcher · « **Reply #3 on:** April 07, 2008, 12:42:36 PM »

Remember, the Street Rods will have the Reactor coverstock, which is stronger than you think. It's the same type of cover as we've seen on the Agent, Spit Fire, and Tropical Storm. Even with a weak core, the Reactor is going to grab the lanes a lot. I'd say they're going to be more medium to medium light condition balls at best. And if the lanes are absolutely fried, then yes, plastic might be your best friend.

pegleg42090 · « **Reply #4 on:** April 07, 2008, 12:48:28 PM »

Go with one of the Jolts. Not the particle version though. ACCU-Tread Cover. Reactor is very strong to be put on a weaker ball such as a Street Rod or Tropical. I purchased a Tropical Storm and had to take a double take looking at that ball reaction. Took it up to 4000 grit and got a better ball reaction though.

Edited on 4/7/2008 12:49 PM

uwecbowler · « **Reply #5 on:** April 07, 2008, 06:03:09 PM »

How would a Jolt or Jolt Pearl react with a long pin to PAP distance, like 5 or more inches?

batbowler · « **Reply #6 on:** April 08, 2008, 11:51:25 PM »

Don't shoot the "Messenger", but the Street Rod is using the Messenger cores that was left over from the sell of Columbia to Ebonite! It should be an awesome ball with the Reactor cover and the RG and Diff. will be similar numbers to the HB Hotrod. Just my $.02, Bruce
--------------------
"Train a child up in the way he should go and when he is old he will not turn from it."

charlest · « **Reply #7 on:** April 09, 2008, 12:07:40 AM »

quote:
Don't shoot the "Messenger", but the Street Rod is using the Messenger cores that was left over from the sell of Columbia to Ebonite! It should be an awesome ball with the Reactor cover and the RG and Diff. will be similar numbers to the HB Hotrod. Just my $.02, Bruce
--------------------
"Train a child up in the way he should go and when he is old he will not turn from it."

which also look a lot like upside down Dyno-Thane Element, NE10 (http://www.bowlingballreviews.com/ball.asp?ballid=2923),
or Storm Bolt cores ....
--------------------
"None are so blind as those who will not see."
Unofficial Ballreviews.com FAQ

stormed1 · « **Reply #8 on:** April 09, 2008, 06:31:23 AM »

Looks to me like the old Power Bolt core. Should be reasonably smooth.

batbowler · « **Reply #9 on:** April 09, 2008, 02:30:21 PM »

I was told by a Storm rep that they were left over from the sell of the plant in S.A. TX., when he came by the shop for a visit! It could be all of the above since the NE10 was made at the same plant! Thanks, Bruce
--------------------
"Train a child up in the way he should go and when he is old he will not turn from it."

Edited on 4/9/2008 2:35 PM

Author Topic: New Street Rods (Read 3489 times)

uwecbowler

New Street Rods

n00dlejester

Re: New Street Rods

uwecbowler

Re: New Street Rods

Dan Belcher

Re: New Street Rods

pegleg42090

Re: New Street Rods

uwecbowler

Re: New Street Rods

batbowler

Re: New Street Rods

charlest

Re: New Street Rods

stormed1

Re: New Street Rods

batbowler

Re: New Street Rods