win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: Paradigm layout  (Read 2343 times)

jjweb

  • Hero Member
  • *****
  • Posts: 743
Paradigm layout
« on: January 16, 2006, 10:15:35 AM »
Has anybody tried a 5 X 3 layout on a Paradigm? Storm recommended the layout for me.
Logged

 

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Paradigm layout
« Reply #1 on: January 16, 2006, 08:22:57 PM »
Bump!
Logged

Strider

  • Hero Member
  • *****
  • Posts: 6751
Re: Paradigm layout
« Reply #2 on: January 16, 2006, 08:46:18 PM »
I guess if Storm recommended it for you it must be OK.

Don't forget to make sure your driller is familiar with the specialized drilling instructions.  Always follow the instructions with high end asymmetric balls.

http://stormbowling.com/pdf/drill_specs/psa%20drill%20-%20right-reading.pdf
--------------------
Penn State Proud

Ron Clifton's Bowling Tip Archive
Logged

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Paradigm layout
« Reply #3 on: January 16, 2006, 08:51:19 PM »
I wanted the massive backend reaction I keep seeing with it, but I'm not sure with this layout. The 4 X 4 was also mentioned, but said it could be too early for me; Low revs and slow speed.
Logged

Brickguy221

  • Hero Member
  • *****
  • Posts: 9918
Re: Paradigm layout
« Reply #4 on: January 16, 2006, 11:12:47 PM »
quote:
--------------------------------------------------------------------------------
I wanted the massive backend reaction I keep seeing with it, but I'm not sure with this layout. The 4 X 4 was also mentioned, but said it could be too early for me; Low revs and slow speed.  


Who did you talk to at Storm? I have low revs and slower speed (14-15 mph) and Steve K. recommended the 4 x 4 drilling "A" on their drilling chart. It has a 1 1/2" buffer between the Pin and VAL. My driller felt it best to have a 2 1/2" buffer and drilled it 4 x 4 1/2. On synthetic lanes, this ball gets down the lane and has great "pop" on the back-end.

--------------------
Brick
Logged
"Whenever I feel the urge to exercise I lie down until the feeling passes away"

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Paradigm layout
« Reply #5 on: January 16, 2006, 11:15:19 PM »
I have a feeling that with the 5 X 3 it might go too far down lane.

So my question is......

5 X 3 or 4 X 4?

Speed: 14.5 - 15.5 MPH
PAP: 4 1/2 -- 5/8 up"
Tilt: Around 45 degrees
Logged

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Paradigm layout
« Reply #6 on: January 17, 2006, 08:31:52 AM »
This is replacing my Shock & Awe. I get great midlane but nothing, zip, nada, zilch on the backend.

Edited on 1/17/2006 9:21 AM
Logged

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Paradigm layout
« Reply #7 on: January 17, 2006, 08:57:19 AM »
I forgot to add:

The box specs are:
15lb 4oz
2.68 TopWeight
2-2.5" pin
Logged

Mr Straight Ball

  • Hero Member
  • *****
  • Posts: 1021
  • 1 board or bust!
Re: Paradigm layout
« Reply #8 on: January 20, 2006, 05:14:48 PM »
Since everyone is typing everything but an answer to your question. #1, congratulations for putting down that Shock & Awe. #2, I have a 5x3 Paradigm with a 4" pin buffer. I throw the ball around 18mph with a rev rate to match. For me, standing against the ball return is an everyday thing, so this layout allows me to get the ball to my breakpoint before it unleashes.

5x3 should be good for you as it will help prevent the ball from burning up on you. Good luck and I hope you experience the success I have with mine!
--------------------
STAY FF MY BLCK!
...Nthing strikes like a STORM
Just call my ball Capt. Crunch
Logged
Bakes...Bevel is for wimps!!!
Storm Products, Inc. family member
40 Boards & A Ball - www.40boards.com
Storm Products, Inc. - www.stormbowling.com
Ko's Glen Burnie Pro Shop

jjweb

  • Hero Member
  • *****
  • Posts: 743
Re: Paradigm layout
« Reply #9 on: January 20, 2006, 05:18:48 PM »
Thanks for replying, but I decided to drill it 3.5" X 3.5" - 1 1/2" pin buffer.

I also made a post about it: http://www.ballreviews.com/Forum/Replies.asp?TopicID=111318&ForumID=13&CategoryID=2
Logged
Pages: [1]
« previous next »