I have perfected my method to achieve 1500 grit polished.
you will need:
500 abralon
storm step 2
sand ball for at least 15 seconds on all 4 sides
then I like to use paper towels but they do fall apart so a rag would work too.
squirt about a quarter size amount of step 2 on the ball
spray rag/paper towel with water so that its just damp
spread with rag/towel to evenly coat the surface
next turn on spinner and use LIGHT PRESSURE for only 15-20 SECONDS
re-spray rag/towel and repeat those steps (another quarter size amount, damp rag, spread it, spinner with light pressure for 15 seconds) until the ball starts to look shiny. its that easy!
now just buff that side dry with a dry rag/paper towel and do the other side. thats it! ball should look nice and shiny just like when it was new
works every single time and is very easy as all you are doing is stepping up the shine of the ball till it reaches 1500 grit polished.
I couldnt figure this stuff out to save me but after seeing someones suggestion of 500 abralon then spreading it out over and over again it worked! thanks goes out to whoever that was.
I have since done my t-road twice and 2 different rapid fires and the owners of the rapid fires love the reaction again. exactly like OOB.
good luck!
Edited on 5/10/2010 1:55 PM
