Author Topic: Xception 5.0(drill ??) (Read 804 times)

Gunny · « **on:** August 26, 2006, 04:06:25 PM »

brand new, given to me, Pin 2" TW 2 3/4oz.

how should i lay it out? was thinking of having
it skid/snap, just to see what it could do. or was
thinking of having it drilled with pin somewhere to the
right of ring finger to get full flare potential. was also
thinking of having pin somewhere above & between fingers in
a 5-5 1/2" from PAP. not to familiar with all this new jazzy
stuff you have to do to the balls. but it was given to me free
and just wanted to do a "what the heck" drill to see what it could
do. not sure what each drill will do...anyone suggestions?

C-G ProShop-Carl · « **Reply #1 on:** August 27, 2006, 09:28:19 AM »

Gunny,

The 5.0 is one of the more difficult balls to suggest a layout for. Some of us saw tremendous backend out of the ball and others saw it as more of a smooth/benchmark kind of ball.

I had mine drilled with the under my bridge and MB in the number 3 position and it was stronger in the backend than my Xception.

Basically....I would just put your favorite layout on the ball and see how it works for you.

Goodluck,
Carl
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com

Tag Team Member #1
(tag team partners w/ Rick)

tenpinspro · « **Reply #2 on:** August 27, 2006, 01:42:40 PM »

Hey gunny,

With the 2 inch pin, I'd place it under bridge and kick the mb out between #2 and #3 on our drill sheet (the one with only 3 mb positionings). Basically it should end up where CMD stated, about 45 degrees from pin angle.

I had better success with this ball on true medium conditions, it does not like heavy oil but moves well when it can sniff some dry. Hope this helps some...
--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff
Vise Inserts Staff
www.Trackbowling.com

See profile for Track Ball videos

*El Presidente of the Track Legion

Gunny · « **Reply #3 on:** August 27, 2006, 09:25:38 PM »

if i went with a label leverage, 3 3/8 x 5, what
type of reaction would i be looking at? is it possible?

Edited on 8/27/2006 9:21 PM

LuckyLefty · « **Reply #4 on:** August 27, 2006, 09:30:13 PM »

something different than everything suggested above.

Why ask?

REgards,

Luckylefty
--------------------
Open the door...see what's possible...and just walk right on through...that's how easy success feels..

Gunny · « **Reply #5 on:** August 27, 2006, 09:34:06 PM »

just getting ideas on what to do. the ball was
given to me free so i figure to try something different.
im leaning towards drilling it to have max flare.

C-G ProShop-Carl · « **Reply #6 on:** August 27, 2006, 10:42:30 PM »

Gunny,

Label leverage on the 5.0 is not the type of label leverage you are used to. Don't forget that the 5.0 is asymmetrical....so the 2 things you have to be concerned with in placment is the PIN and MB, CG location will not matter other than a weighthole.

Carl
--------------------
Carl Hurd
C-G Pro Shop (owner/operator)
Youngstown Ohio

Track Intl.-Amateur/Pro Shop Staff
www.trackbowling.com

Tag Team Member #1
(tag team partners w/ Rick)

tenpinspro · « **Reply #7 on:** August 28, 2006, 02:50:26 PM »

quote:
im leaning towards drilling it to have max flare.

Hey Gunny,

That would put us back at 3 3/8 pin and 3 3/8 mb....
--------------------
Rick Leong - Ten Pins Pro Shop
Track Intl. - Amateur/Pro Shop Staff
Vise Inserts Staff
www.Trackbowling.com

See profile for Track Ball videos

*El Presidente of the Track Legion

Gunny · « **Reply #8 on:** August 29, 2006, 09:05:47 PM »

oh, ok. i see now. well i told my pro shop
that to have the pin under the bridge with the
MB in the #3 position. thanks Carl, Rick for the
help. i will let you know how it goes in a few days.

Author Topic: Xception 5.0(drill ??) (Read 804 times)

Gunny

Xception 5.0(drill ??)

C-G ProShop-Carl

Re: Xception 5.0(drill ??)

tenpinspro

Re: Xception 5.0(drill ??)

Gunny

Re: Xception 5.0(drill ??)

LuckyLefty

Re: Xception 5.0(drill ??)

Gunny

Re: Xception 5.0(drill ??)

C-G ProShop-Carl

Re: Xception 5.0(drill ??)

tenpinspro

Re: Xception 5.0(drill ??)

Gunny

Re: Xception 5.0(drill ??)