win a ball from Bowling.com
« previous next »
Pages: [1] 2

Author Topic: No Mercy Review  (Read 5136 times)

Long Roller

  • Hero Member
  • *****
  • Posts: 2289
No Mercy Review
« on: October 21, 2006, 10:41:15 AM »
Layout:  http://www.ballreviews.com/Forum/Replies.asp?TopicID=139983&ForumID=18&CategoryID=5

I threw it tonight on older wood lanes with a 38' house shot and a good amount of oil.  I will start by saying that this ball is not a hook monster like it is advertised as.  My 357 magnum had about the same breakpoint but cover 3-5 more boards on the backend and a much more pronounced move to the pocket.  The No Mercy had a soft arc of the point and when it hit the dry boards it carried very well.  When I missed left and put it in the oil, it sat and deflected off the head pin leaving 10 pins.  When I missed right it hooked much earlier and rolled out again leaving 10 pins.  I would be lying if I said I wasn't disappointed off of its first showing.  I will update throwing on a couple different shots.  Feel free to pm me if you have any other questions.
--------------------
Shane Soule
Logged

 

DanR

  • Sr. Member
  • ****
  • Posts: 396
Re: No Mercy Review
« Reply #1 on: October 21, 2006, 06:53:51 PM »
I think the surface maybe too smooth out of box if hwne the ball us surpose to be a hook monster.  I compared the 2 ball in the shop and one was duller than the other.  I plan on changing the surface for the heavier oil patterns.
Teammate used it league with his with less sheen the ones in the shop and it hooked more than the Black Widow
Logged

bgh

  • Hero Member
  • *****
  • Posts: 702
Re: No Mercy Review
« Reply #2 on: October 21, 2006, 07:14:11 PM »
Sometimes, the NO MERCY can be on the bowler's end and not at the pins.
Rumor has it that Anthony Hopkins (Hannibal Lecter) eats these bowling balls for breakfast.
The ad in the new BTM November issue is well... to say the least Hammer has a terrific sense of humor, the review looks good also.
--------------------
KEG LERX
"The pins adhere to the law of the "Golden Rule"."
Ball Arsenal Registry (includes drilling Specs) @ Allbowling.com



Edited on 10/21/2006 7:12 PM
Logged

wulfpackbwlr

  • Sr. Member
  • ****
  • Posts: 493
Re: No Mercy Review
« Reply #3 on: October 21, 2006, 09:53:42 PM »
Long Roller, your review is the complete opposite of what I witnessed from the pro shop owner i help out.  He drilled his like the #1 drilling and from what I saw and what he said he's not been able to play that deep with a ball in a long time.  He has med-low revs and was able to pretty much play where he wanted with it.  What does it look like after drilling as I'm thinking I may have looked at the lines for the layout incorrectly.
--------------------
NCSU 2006
All Dyno-Thane
Logged

Long Roller

  • Hero Member
  • *****
  • Posts: 2289
Re: No Mercy Review
« Reply #4 on: October 21, 2006, 09:55:39 PM »
Got that layout approved by Brian Graham so try again.
--------------------
Shane Soule
Logged

wulfpackbwlr

  • Sr. Member
  • ****
  • Posts: 493
Re: No Mercy Review
« Reply #5 on: October 21, 2006, 10:01:42 PM »
Was just a comment and a request.  Not stating you were wrong on what you experienced.  Just stating it was opposite of what I saw in person myself.
--------------------
NCSU 2006
All Dyno-Thane
Logged

Long Roller

  • Hero Member
  • *****
  • Posts: 2289
Re: No Mercy Review
« Reply #6 on: October 21, 2006, 10:03:34 PM »
I have only thrown this 2 games and some balls need a breakin period and that is what I am hoping for.  I will post back after a couple more sets and give an update.  I'm just warning not to run out and buy one if your looking for a hook monster that is going to out turn the BW.
--------------------
Shane Soule
Logged

Long Roller

  • Hero Member
  • *****
  • Posts: 2289
Re: No Mercy Review
« Reply #7 on: October 22, 2006, 10:18:50 AM »
ttt
--------------------
Shane Soule
Logged

alzgarvin

  • Full Member
  • ***
  • Posts: 240
Re: No Mercy Review
« Reply #8 on: October 22, 2006, 04:59:39 PM »
Longroller....   What weights did you end up with and did you use a weight hole. Did you use the 4 inch pin and Hart in track? I threw this ball at a sneak peek and is definitely a board or two stronger than the demo widow with pin above bridge and mb right of thumb with the suggested #1 No Mercy drill. The demo No Mercy however did not have an out of line cg so with drill #1 with pin around ring and HART in track cg was still close to palm center.  It sounds like your ball would be a great lefty set up. My demo ball was out of line with cg left of pin to hart a whopping 1 3/4 inch. I also talked with Brian Graham and he agreed this would be wonderful for a lefty #1 drill. For a righty the best we could do with mine would be a #2 drill with pin next to ring (approx. 4 " PAP ) and HART just to right of thumb...which is 2 boards weaker but still very strong.           Alzgarvin
Logged

RevLefty

  • Hero Member
  • *****
  • Posts: 901
Re: No Mercy Review
« Reply #9 on: October 22, 2006, 06:09:41 PM »
I totally agree, this is no a hook monster.  I drilled this in the number 1 layout and it was only a little sooner than my domination on a med house shot.  This ball is totally no what they advertise and I wil not buy another hammer unti they start making some qualtiy stuff,  I was a hammer fanatic when they reintroduced themselves a few years back but i dont like whre they are going with their product in the last couple of years.
--------------------
There is a epic saga about to unfold in the upcoming season, last year was an epic battle,but i foresee greatness on the horizon!!!
Logged

Long Roller

  • Hero Member
  • *****
  • Posts: 2289
Re: No Mercy Review
« Reply #10 on: October 22, 2006, 06:11:49 PM »
I think this ball could fit into someones lineup easily, but will be disappointed if they are looking to cover 30 boards.
--------------------
Shane Soule
Logged

TerryV

  • Jr. Member
  • **
  • Posts: 54
Re: No Mercy Review
« Reply #11 on: October 22, 2006, 08:47:55 PM »
I just drilled this ball up this past thursday. I used the drill spec #1. This ball held up to what I expected out of it. I saw an earlier roll out of it, and a strong and continuous back end. Even on the fresh oil I saw this. I was pleased whith how it rolled for me. I saw this ball about three boards or so stronger then my RS-X at 1000 with the CG about 2-3" off the center of grip and pin up above the ring. I was also able to use this ball as I opened up the lanes a bit simply by moving left some. I missed right a couple times and then actuly wanted to put the ball out a bit and it came back with out question with plenty of pop at the pocket. This ball does hook. AT least for me it covers some boards.
--------------------

Most reacent proud of accomplishment... The big four was OWNED!! when it truely matters, pot games...hehe > )

Logged

jkiser01

  • Hero Member
  • *****
  • Posts: 7124
Re: No Mercy Review
« Reply #12 on: October 22, 2006, 09:02:00 PM »
TerryV,

I agree with you. I drilled my No Mercy about a week ago and have used it about 10-12 games so far and I really like it. I used the #1 suggested drilling and this ball does cover some boards, I will tell you that. Please remember, the box finish on this ball is 4000 abralon so if you want more hook, take it down to 1000 and watch this thing go..

I am looking forward to playing around with the surface some more to get the exact reaction I am looking for..
--------------------
One day when I grow up I hope to be able to throw the ball AND carry as good as g_thing!!
Logged
Radical Bowling Technologies ...Its more than just an Attitude!

TOON

  • Hero Member
  • *****
  • Posts: 630
Re: No Mercy Review
« Reply #13 on: October 22, 2006, 10:21:04 PM »
I have one too, drilled with layout #1.  With only a couple of games on it, I really love it.  

Anyone that does not like theirs can contact me about selling theirs!
--------------------
TOON
Proud to be a HAMMERHEAD!!

Logged
TOON
Proud to be a Hammerhead!

chitown

  • Hero Member
  • *****
  • Posts: 5876
Re: No Mercy Review
« Reply #14 on: October 24, 2006, 11:52:48 PM »
--------------------------------------------------------------------------------
After watching the vid of this ball and the Black Widow how can one not want this ball? I just made up my mind. I buying the NO MERCY! I'm making the call tomorrow to see if my pro shop guy can locate one for me.

Is Hamer not on top of the ball market or what?


--------------------
GO BEARS!  Super Bowl bound!
Logged
Pages: [1] 2
« previous next »