win a ball from Bowling.com
« previous next »
Pages: [1]

Author Topic: X-Out Ball vs. Regular Ball  (Read 2043 times)

Rival

  • Sr. Member
  • ****
  • Posts: 259
X-Out Ball vs. Regular Ball
« on: October 14, 2009, 06:24:02 AM »
Hey guys I'm looking to replace a ball in my arsenal that probably has 600+ games on it.  It's lost some reaction and Im looking to replace it with a new one.  Problem is, the ball is discontinued and Ive only found one NIB one, but it's an x-out because it has a 5" pin.  The top weight is normal and the only difference is the long pin.  My current ball is drilled pin up and is approximately 5 inches from my pap... Could I get the same reaction out of the x-out ball or will it be considerably longer down lane  because of the pin distance?  If it is longer... Can I get away with drilling the ball 4 inches from my pap to bring it closer?  Help me out here
--------------------
"So there I was... BALLS DEEP!!!"
Logged

 

lsf_21

  • Hero Member
  • *****
  • Posts: 3310
Re: X-Out Ball vs. Regular Ball
« Reply #1 on: October 14, 2009, 02:27:24 PM »
might want to post what ball you want, somebody here might be able to help you get exactly what you want.
--------------------
GO CUBS!!!!
GO CELTICS!!!!
Logged

TheFreeAgent

  • Hero Member
  • *****
  • Posts: 795
Re: X-Out Ball vs. Regular Ball
« Reply #2 on: October 14, 2009, 02:36:09 PM »
quote:
might want to post what ball you want, somebody here might be able to help you get exactly what you want.


+2
Logged
Ryan "Junk" Pitman
Ebonite amateur staff
Indianapolis IN.

Kid Jete

  • Hero Member
  • *****
  • Posts: 2559
Re: X-Out Ball vs. Regular Ball
« Reply #3 on: October 14, 2009, 03:55:12 PM »
Symmetric vs. Asymmetric will make a slight difference too.  If you're driller knows what he's doing a 5" pin should be no problem.  Plus you should be able to get that ball cheaper than one that isn't a blem.
Logged

Rival

  • Sr. Member
  • ****
  • Posts: 259
Re: X-Out Ball vs. Regular Ball
« Reply #4 on: October 14, 2009, 04:06:11 PM »
It's a Rival... They have one for about $75 shipped and it has a 5 inch pin.  If someone here has a nib Rival for cheaper... By all means, let me know
--------------------
"So there I was... BALLS DEEP!!!"
Logged

Kid Jete

  • Hero Member
  • *****
  • Posts: 2559
Re: X-Out Ball vs. Regular Ball
« Reply #5 on: October 14, 2009, 04:29:36 PM »
I could be wrong but I am under the impression that pin length on a symmetric ball is a lot less important than asymmetric.  All that it will effect is the ending static weights.  With that said, a 5" pin is hardly an "x-out", it's right on the borderline of being a 1st quality.  Super short pins are the problematic ones a 5" pin should be easy to duplicate a reaction with.
Logged

Rival

  • Sr. Member
  • ****
  • Posts: 259
Re: X-Out Ball vs. Regular Ball
« Reply #6 on: October 14, 2009, 06:17:21 PM »
Thanks alot Kid Jete... Your information certainly helps. I'm certainly thinking about snatching it up.
--------------------
"So there I was... BALLS DEEP!!!"
Logged

JohnP

  • Hero Member
  • *****
  • Posts: 5819
Re: X-Out Ball vs. Regular Ball
« Reply #7 on: October 14, 2009, 08:17:44 PM »
The only thing a 5" pin out distance really affects is the ability to use certain layouts without a balance hole.  If you don''t mind a balance hole it makes no difference.  The first thing I would do is check the cg location and top weight on my dodo scale.  --  JohnP

Edited on 10/14/2009 8:18 PM
Logged

TheFreeAgent

  • Hero Member
  • *****
  • Posts: 795
Re: X-Out Ball vs. Regular Ball
« Reply #8 on: October 14, 2009, 08:55:40 PM »
my dad has the rival and i dont think he likes it very much probably has 20 games on it if you were looking for a cheaper route possibly trade for something?
Logged
Ryan "Junk" Pitman
Ebonite amateur staff
Indianapolis IN.
Pages: [1]
« previous next »